• Movie Studio

  38 answers, most recent on 3/29/2020

  RE: compatability with windows 10
  Hi . . . I understand correctly that you are using Windows 10 and are able to import video via the firewire into MEP? . . . On my old computer, not a Dell, running Windows 10 I was able to capture via Firewire from an old JVC camera. The procedure
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  Hi John. From the blurb of the Asus motherboard concerning audio inputs and outputs. 'Impedance sense for front and rear headphone outputs'. 'Jack-detection, Multi-streaming, and Front Panel Jack-retasking', 'SupremeFX Shielding Technology' and
• Movie Studio

  3 answers, most recent on 4/17/2019

  RE: Problem with stereo3d export side-by-side
  The problem with 3D export is unlikely to be with MEP as I have exported quite a few 3d videos over the years from Fuji W1 and W3 and JVC TD1. The problem is usually that different players, particularly tvs, seem to require different formats. I
• Movie Studio

  12 answers, most recent on 11/9/2018

  RE: Problem with stereo3d export side-by-side
  It doesn't surprise me that you are having trouble finding the right export properties for your Fuji W3 as one of the reasons for the quick end to the 3D boom was the very frustrating lack of compatibility between different makes of equipment. A
• Movie Studio

  One answer, on 10/1/2018

  No sound when importing AVCHD video.
  No audio playback when importing AVCHD video from my JVC Everio camcorder.  I am using MEP v17.0.3.183 in a Win 10 environment.  I downloaded the MPEG-4 FULL Codec Upgrade, with no change in audio.  Importing audio-only media (.m4a) plays the audio
• Movie Studio

  One answer, on 5/18/2018

  Magix suddenly doesn't let me hear any audio
  Since today my Magix Video Deluxe just doesn't give any sound anymore. Yesterday I recorded and editted a video without any problems. Today I started my computer, came back to edit some more videos and the sound was complete gone. The recorded files
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  Hi there! OK, busy week here, and not nearly enough time to look into this, but I got your newest file, and it's not like anything I've yet seen in mediainfo before, but it looks like the internals are all there, and it doesn't look like the usual
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  Hi, It's certainly possible that the original clip I posted was actually set to AVCHD and not the MP4 setting as I thought, as it was shot at the beginning of last year and I am not certain. I usually use the MP4 setting as I prefer the quality.
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  Hi, I took two brief shots with the TD1 this morning, one set on AVCHD, and the other with the same shot but set to AVCHD 3D, which was a firmware upgrade on the camera to give a higher quality AVCHD format. I have attached a fuller data sheet of
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  I'm off to bed now, but have put a JVC battery on charge and will try to get a quick AVCHD shot to upload in the morning. Roger
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
    Hi Mindsong, As requested here is a link to a short clip recorded on the JVC TD1 during a trip to The Netherlands. https://www.dropbox.com/s/9puvtunhncad53t/00092.MTS?dl=0 Roger Wow, thanks! I'm already taking that file apart to see what makes
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  I'll try to answer some of your questions, although I have a very intensive filming and editing schedule over the next few months, so no time to play around with 3d filming, much as I would like to. Maybe later in the year I will get time to do some
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  Hi Mindsong, As requested here is a link to a short clip recorded on the JVC TD1 during a trip to The Netherlands. https://www.dropbox.com/s/9puvtunhncad53t/00092.MTS?dl=0 Roger
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  I'll try to answer some of your questions, although I have a very intensive filming and editing schedule over the next few months, so no time to play around with 3d filming, much as I would like to. Maybe later in the year I will get time to do some
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  Hi Mindsong, After reading your post, I tried a quick experiment. For my general 3d for fun, I use either my Fuji W3 like you, or my JVC TD1 which both record a packaged 3d file in one container, so I thought I would try a pair of Panasonic FZ1000s
• Video Pro X

  13 answers, most recent on 3/17/2018

  RE: VPX and importing dual-stream MVC 3D stereo formats - which work?
  Hi Mindsong, After reading your post, I tried a quick experiment. For my general 3d for fun, I use either my Fuji W3 like you, or my JVC TD1 which both record a packaged 3d file in one container, so I thought I would try a pair of Panasonic FZ1000s
• Movie Studio

  20 answers, most recent on 9/1/2016

  RE: Transferring/copying blu-ray dvd home movies to hard drive to view on TV
  Hi John and Terry, Have moved on a little since the questions below and have reached the following position. I am going to back up my movies as suggested by John and have just got a new 4TB HD to do so. In the meantime, I also bought a JVC
• Off topic

  9 answers, most recent on 4/18/2018

  RE: Original video is in color, Magix preview shows it as black and white
  Hi Linda . . . . If I can find a way to connect the camcorder (which still works) to the Magix converter, I could buypass the VCR. . . . . . AFAICS the GR-7CU has a composite video/audio output socket. However it would appear to be a special
• Off topic

  9 answers, most recent on 4/18/2018

  RE: Original video is in color, Magix preview shows it as black and white
  Dear John,      The VCR is an LG AF999P. In the manual, it says: Television System: CCIR standard, PAL (B/G), SECAM (B/G) Color signal. Recording Format: PAL/MESECAM. RF reception: PAL B/G, SECAM B/G. RF OUT: PAL G Input level: VIDEO
• Off topic

  9 answers, most recent on 4/18/2018

  Original video is in color, Magix preview shows it as black and white
  I am trying to back up VHS-C (compact) videos from a 30-year-old JVC camcorder using an old VCR.  The original movies show on the television in color.  However, when I try to import them to Magix, the preview screen shows them as black and white.
• Movie Studio

  3 answers, most recent on 11/28/2014

  RE: NO VIDEO when I import .MOV shot on a JVC camera
  Hi, More information would give us a better chance of helping you. Has this always been the case? What other files have you used successfully in your projects? I don't know anything about your 'JVC Camera' (specific model?) but can you view
• Movie Studio

  3 answers, most recent on 11/28/2014

  NO VIDEO when I import .MOV shot on a JVC camera
  When I import .MOV files that I shot on a JVC Camera there is no video - only a WHITE SCREEN. I use MEP 2013 - can anyone help?? Thanks!
• Photostory

  4 answers, most recent on 10/26/2014

  RE: Please can someone provide me with a fix for the following error log
  Hi . . . . Datawrite Titanium 16x4.7 GB DVD-R . . . .  Try a different brand of disc from a reputable manufacturer  eg Verbatim, JVC Taiyo-Yuden. John
• Video Pro X

  4 answers, most recent on 9/16/2014

  RE: mpeg 2 videos .mov format are all white frames what codec do I need and where do I get it?
  THe source is from a JVC GY-HM100U and is in native .mov format for FCP which produced an MPEG 1/2 files but I converted it to MPEG 4 and all is well. Also changed the file format on the camera to native MP4 so that will do the trick. THe MP4