Search the MAGIX Community for tutorials, questions and solutions as well as for forum members

I just upgraded from MMM Premium to Samplitude Pro X5 with latest updates. When using MMM, I can plug my headphones directly into my laptop and hear the audio without any USB interface. However, when I open Samplitude with my headphones plugged

Music Maker

4 answers, most recent on 4/5/2021

[Solved] can't record audio signal from microphone (Music Maker Premium 2021)

when recording audio on a track - the audio record settings don't show a signal. When I press the peak control button I see my microphone with a signal. How to activate this? Microphone used : AKG P120 (Condensor Microphone) (XLR) USB Interface :

Samplitude

6 answers, most recent on 3/10/2021

[Solved] Guitar Effects Not Working

Hi, I am hoping that someone might be able to help me with my strange problem. I have recently had to reinstall my Windows 10 Desktop computer due to a major issue with Windows Updates. I have a Magix Subscription for both Samplitude Music Studio

Music Maker

8 answers, most recent on 3/2/2021

RE: [Solved] Recording from positive grid spark amp

@Doron-Golan Thanks for your screenshots. On your first screenshot it looks like you have selected your Amp as an playback device. This, of course, wouldn't work. The second and third screenshots show it as an input device but you cannot hear

Music Maker

8 answers, most recent on 3/2/2021

[Solved] Recording from positive grid spark amp

Hi, I purchased the upgrade from the 2015 version to 2021. I have many issues with the upgrade including continuing crushes. I recently purchased the positive grid spark amp. Music maker will not record using the USB input from the spark amp

Music Maker

7 answers, most recent on 1/30/2021

[Solved] Track in coming sound while I'm recording another track

Hello, I had noticed on my latest version of Music Maker, when I'm recording two tracks, the first track comes in the second track, so I want to listen the track but not coming inside the new track. I want to record the second track clean with just

Audio Cleaning Lab

15 answers, most recent on 1/14/2021

RE: [Solved] Unable to make recording from cassette to computer hard drive

Hello Just wanted to let you know that I finally had to dust off my wife´s old laptop and install ACL on it. And it worked. It will be a little more inconvenient with USB sticks back and forth, but it´s better than nothing! So it seems I can´t get

Music Maker

9 answers, most recent on 1/14/2021

RE: [Solved] Instruments missing after upgrade?

@TheDoctorArtist Hi There could be two issues here: . . . . I reinstalled on Disc "F". . . . Is this a USB external hard drive or a fixed internal drive? . . . . it prompts me for a serial for the 2021 version, when I own the 2020 . . . . That means

Audio Cleaning Lab

15 answers, most recent on 1/14/2021

[Solved] Unable to make recording from cassette to computer hard drive

Hi all I am not able to record from my cassette player to my hard drive which worked fine a few months ago. I´ve connected the cassette player via line out and the Magix box to the line input and also connected the USB cable to the computer. When

Rescue Your Videotapes!

6 answers, most recent on 4/16/2024

[Solved] Rescue Your Videotapes 2.0 with Windows 10. Is it possible?

Hello,I have "Ratuj swoje kasety" 2.0 (Polish version of Rescue Your Videotapes). It has been instaled in 2010 year. I try to use it with Windows 10 now. It does not work. I think the problem is with driver. I can not install MAGIX USB-Videowandler

SOUND FORGE

4 answers, most recent on 12/10/2020

[Solved] Sound Forge 12 - monitor option grayed out

Hello, In Sound Forger 12, I'm trying to monitor the input audio while recording but on the Recording dialog, the "Monitoring" checkbox (and the corresponding speaker icon on the main toolbar) are both grayed out. Why might this option be

SOUND FORGE

6 answers, most recent on 12/5/2020

RE: [Solved] VU-Meter works on play, Don´t works on record

Guys, news. I noticed that this problem with the VU-Meter only works in playback, not in recording, it also appears in Sound Forge 11. In SF 10 it works well. I also noticed something that caught my attention: - Not using a USB input card, but the

Video Pro X

8 answers, most recent on 12/3/2020

[Solved] Transferring video to USB flash drive

Hi can anyone suggest the best way to burn my video to a USB flash drive Normally I deliver all my videos on a DVD through the normal "Burn" section of Video Pro but this time I have been asked to provide it on a USB drive. I am concerned not only

SOUND FORGE

7 answers, most recent on 11/25/2020

RE: [Solved] bad audio input.

I too would surmise you are over-driving a mic input. Typically, mic level is -60dB, line level is usually -10dB unbalanced and +4dB balanced (nominal). I would recommend getting a USB interface that has a mic/line inputOtherwise, a simple 'L pad'

Video Pro X

11 answers, most recent on 10/11/2020

RE: [Solved] OLDER VERSIONS OF A PROJECT?

@MCK Hi. Are the files on an external drive? If so did you change the USB port it was running from? When you saved your project at the end of your first session did you save as or just save? Did you have the Blue lightning symbol ticked with the

Music Maker

2 answers, most recent on 9/27/2020

RE: [Solved] I'm only able to hear MM audio when I use my speakers.

@Dragon-Queen Hi and welcome to the forum. . . . . Music Maker only produces sound when I have my speakers connected. If my speakers aren't connected, the built in audio doesn't work, and even my headphones (which I'm currently using and know they

Music Maker

3 answers, most recent on 9/20/2020

[Solved] How do you map buttons for a Novation Launchpad in Magix Music Maker?

I'm using Magix Music Maker version 28.0.3.51 and want to use a 1st gen Novation Launchpad (NOVLPD01) with it. I had to install the Novation Windows USB driver (link here) since the default automatic one for Windows 10 didn't seem to work with plug

SOUND FORGE

13 answers, most recent on 7/30/2022

[Solved] Sound Forge Audio Studio will NOT open my mp3 file

Attn: Support Please help me. I purchased your SOUND FORGE Audio Studio 14 on September 2, 2020 and am having a problem importing a mp3 file. I get the following error: Warning: An Error occurred during the current operation. The file format is an

Music Maker

One answer, on 9/2/2020

[Solved] Weird soundeffects when using ASIO

Hello, i recently purchased an USB mixer and would like to manage my audio output through this mixer. However, when using ASIO drivers there are weird soundeffects added to my output like reverb and some other stuff. I tried using WASAPI drivers and

Rescue Your Videotapes!

2 answers, most recent on 8/28/2020

[Solved] USB converter Windows 10 doesn't seem to work

Hello, I just received the Resque Your Videos! SET with USB analogue connection kit and succesfully installed the latest software en drivers on my Windows 10 PC. I connected my video device with the yellow videoplug into the usb adapter (Magix model

SOUND FORGE

20 answers, most recent on 8/17/2020

RE: [Solved] Incompatibility between all my MAGIX audio programs and Yamaha AG06?

Update, Aug 2020: Revisited this old problem this morning just out of curiosity, and discovered that installing Yamaha Steinberg USB Driver 2.0.3 (for Windows, available here) seems to fix it for me. I can now once again enjoy normal playback in SF

SOUND FORGE

8 answers, most recent on 8/3/2020

RE: [Solved] Installation

Well, I could suggest a lot of things. But I suspect you've tried a lot of them already -- unplugging/plugging the turntable, using an analog instead of a USB connection, installing ASIO4All to see if AS14 is more cooperative with it, seeing if you

SOUND FORGE

8 answers, most recent on 8/3/2020

[Solved] Installation

I have installed your trial software; Sound Forge Audio Studio 14 on a windows 10 home laptop. I am attempting to record from a Sony PS-LX300USB Turntable. In the sound control panel the USB AUDIO CODEC is the default recording device and My

Rescue Your Videotapes!

3 answers, most recent on 7/12/2020

RE: [Solved] Connection error "No connection could be established to device"

@Juri-Fallisi Hi and welcome to the forum. . . . . "no connection could be established" . . . . Assuming that the USB Video capture device can be seen by Windows ie the correct drivers are installed, the message would suggest you have chosen the DV