• Movie Studio

  17 answers, most recent on 9/26/2019

  RE: Choosing project settings
  @terrypin Hi Terry. You are fretting over old tech problems. First question is why are there so many frame rates? Basically historical, based on mechanical needs of the equipment of the time. Mostly irrelevant in today's workspace with a few
• Music Maker

  18 answers, most recent on 9/6/2019

  RE: Music Maker Premium Edition 2019 is crashing in Windows 10
  Hi @TaSean-Grice Sorry to hear about your troubles. While future development and a conversion of Music Maker to a 64bit application might bring some performance and stability benefits, program instability should never come as an expected result of
• Movie Studio

  3 answers, most recent on 9/3/2019

  RE: Movie Information puzzle
  @terrypin Not been able to check, but from your screenshot it looks like you have 5 images repeated 4 times on the timeline.The listed files will only list unique files. If you have one file containing ie 1 hour movie and you have 6 sequences from
• Movie Studio

  No answers, created on 8/28/2019

  2020 version botched 3D display, 2019 was OK
  I am creating a slide show with side by side (SBS) full width 3Dimages.  I put them into MEP, and then select 3D.  See jpg withincorrect aspect ratio.  The image is displayed as if it were SBSanamorphic half width.  If I output the video it is
• Movie Studio

  5 answers, most recent on 7/4/2019

  Fade thru black issue
  Hi Can anyone reproduce this odd behaviour with fade through black? I set up the 6 video clips as a collage - see images below - with Fade thru black for each pair- in my case these were over a duration of 9 frames. Track layout What should happen
• Video Pro X

  2 answers, most recent on 6/20/2019

  RE: convert .iso file to mp4
  @keruxjeff Hi . . . . convert an iso file to a format VPX will recognize . . . You cannot convert an iso file to a format VPX can load, however you can copy the video files from it. If you are using Windows 10 - open Explorer right click the iso
• Movie Studio

  5 answers, most recent on 6/16/2019

  RE: Subtitle keeps jumping to the end of clip when I try to add subtitle
  @Earl-Soldier I'm using MEP Premium so I'm not sure if what I will tell you will help if some of my suggestions are not capable of being implemented in your version, but here goes. First I'd like to tackle your last point. If it were me, I would
• ACID

  20 answers, most recent on 10/18/2019

  RE: Acid pro 9 new install won't run
  Actually for what I am using it for it has been fantastic.... MUCH better than Ableton and it still has the best workflow of any DAW so hopefully Magix can sort out the problems in the near future. I will be using Acid Pro8 for recording, editing
• Music Maker

  9 answers, most recent on 6/9/2019

  RE: Is it allowed to sell tracks I made with music maker jam app?
  @bubbb . . . . How about if I just use the instruments on Magix Music maker to make a song, do I need a license . . . . A licence is not needed if you use the instruments and the song is your own composition, the only with the caveat that you must
• Video Pro X

  126 answers, most recent on 8/9/2019

  RE: VPX11 released today - Comments
  Multi-cam I don't have time at present for an in-depth exploration, but I've just run my test sequence that has failed for the last ten months and can confirm that it does now seem to be working fine. I'm somewhat lost for words..... - Mike -
• ACID

  No answers, created on 6/4/2019

  copying clips into my loop folder
  how do i copy a clip in the sequencer to my loop folder in the media tab? i would like to mash up 2 loops and then copy them into my loop folder to use in other daws.
• Video Pro X

  21 answers, most recent on 7/8/2020

  RE: Wishlist for future VPX versions (beyond VPX10)
  @Scenestealer Hi Peter, I wrote up the following last night, took too long, didn't do a copy to clipboard, unable to post because I got logged out. We need more time! Further to your comments about seeing the effects produced by adding a LUT and
• Video Pro X

  21 answers, most recent on 7/8/2020

  RE: Wishlist for future VPX versions (beyond VPX10)
  Hi JohnCB Point 17: It's not something that I have had problems with often. I have in the past wanted to change the sequence (effects after Neat Video should be before), but this was rare. I used a manual method, duplicate clip, remove some effects,
• Video Pro X

  21 answers, most recent on 7/8/2020

  RE: Wishlist for future VPX versions (beyond VPX10)
  Point 20) and 21) - I would like to see this info too but as an indicator at the edge of the clip showing that it had been trimmed - perhaps just a coloured bar and a number of secs and frames that remained beyond the ends. I think Pinnacle Liquid
• Video Pro X

  21 answers, most recent on 7/8/2020

  RE: Wishlist for future VPX versions (beyond VPX10)
  @Scenestealer Hi . . . . Modify the sequence of effects - Can you explain what advantage this would give please? . . . . Yesterday I was trying to correct an image using Rotation - to straighten it up a bit, 3D Distortion to correct a parallax error
• Video Pro X

  21 answers, most recent on 7/8/2020

  RE: Wishlist for future VPX versions (beyond VPX10)
  @browj2 Some good suggestions there John. Point 20) and 21) - I would like to see this info too but as an indicator at the edge of the clip showing that it had been trimmed - perhaps just a coloured bar and a number of secs and frames that remained
• Video Pro X

  21 answers, most recent on 7/8/2020

  Wishlist for future VPX versions (beyond VPX10)
  This was previously raised by Magix in this thread. A few of the requests were implemented, significantly J- and L-cuts. I thought that I would refresh this and add to the list, so it's a mixture of (modified) previous requests and some new
• Movie Studio

  49 answers, most recent on 5/28/2019

  RE: How to create distance in audio?
  With a graphic equalizer. Preferably one that can be automated as the effect will not work as a static effect and has the ability to control narrow, sweeping frequency bands. Personally, I think you are setting yourself an impossible task or at
• Movie Studio

  49 answers, most recent on 5/28/2019

  RE: How to create distance in audio?
  With a graphic equalizer. Preferably one that can be automated as the effect will not work as a static effect and has the ability to control narrow, sweeping frequency bands. Personally, I think you are setting yourself an impossible task or at
• Music Maker

  One answer, on 5/13/2019

  RE: Add single cymbal crash in Music Maker 27.0.3.34
  Hi there, You might want to familiarise yourself with using MIDI and sequencing software instruments in Music Maker. This is the way you could then trigger individual drum sounds from the software instruments you mentioned above in the context of a
• ACID

  One answer, on 5/11/2019

  RE: ACID Next
  I don't see it like that at all.... So far Magix have delivered an increasingly stable (on my computers anyway) 64 bit version of ACID Pro that is VERY snappy to work with and has added a lot of extra value with the included plugins and synths...
• Movie Studio

  5 answers, most recent on 5/10/2019

  Encoder delays video/advances audio out of sync MEP17
  This is a fork from the discussion Burn abort (encoder error) MEP17 in which system details were provided. The movie in question was assembled from 11 MTS HDTV files shot from a Sony camera. The files were assembled in sequence with minor edits,
• Music Maker

  13 answers, most recent on 8/28/2019

  Acid Pro broke MMP2019
  So I'm back to using a PC after all these years having switched back from a Mac 8 plus years ago. I found out that Cakewalk during this time is now defunct and was in the market for a new sequencer. Ran across MMP and purchased the Pro version that
• Movie Studio

  27 answers, most recent on 4/14/2019

  RE: Any Adjustment Needed For New GForce GT710 1GB Video Card?
  @CarpentersMate , @johnebaker Had I known in your comment here that you were wanting to export as h.264 HD, I would have recommended you move up to MEP 17 Plus which does support h.264 export in HD (720p) and Full HD (1080p) as shown below I still