• Movie Studio

  6 answers, most recent on 4/21/2020

  RE: Connecting DSLR Camera
  @Christopher-Sliter Hi Christopher. I could only get MEP to recognize my camera as a storage device. It will import and save all files from the camera including the digital negatives but I doubt it can actually use them whereas the JPGs should be no
• Movie Studio

  15 answers, most recent on 4/26/2020

  RE: DVD to fit, chapters not accurate
  I used to have a Sony RDR HXD870 DVD recorder until the burner became worn but you could widely adjust fit a disc and 130 min was pretty good to (I usually made 150 min my max for VHS). Specs: mainly Australia PAL off-air and official movie tapes.
• Movie Studio

  66 answers, most recent on 7/2/2020

  RE: How can i make Movie edit pro plus work faster?
  😁👍 There's a pair of Wharfedale speakers upstairs, they're a bit rubbish, not very clear but for some reason i can't get rid, 🤷‍♂️🤔 Just been playing to see what works fine or not after the changes, In the Effects tree i have NewBlue effects stuff,
• Movie Studio

  5 answers, most recent on 4/18/2020

  RE: HOW DO I FIND BETTER TITLES?
  Does anyone know if MAGIX MOVIE EDIT PRO PREMIUM can do this kind of titling style:   https://www.facebook.com/ScienceNaturePage/videos/196437668328499/ See how it ROLLS OUT, and it is VERY EASY TO
• Other products

  7 answers, most recent on 4/21/2020

  RE: need help with 2 issues
  @Mark-Trahan Hi . . . . very few also allow you to sharpen a blurry picture.  AVS Video Editor has it and interestingly, ConvertXtoDVD also has a very good 'sharpen' feature. . . . I don't know if any of the Magix video programs have that feature .
• Movie Studio

  12 answers, most recent on 6/4/2020

  RE: Export video with custom thumbnail
  I am curious if there was ever an answer for the preview frame (thumbnail) choice problem mentioned above. The interesting thing is the directions are spot on, I have used it before and it was fine. Now however no matter what I do the automatic
• Movie Studio

  23 answers, most recent on 4/10/2020

  RE: New Project - Movie Settings confusing!
  @jonboy834 Other than what the others have added, to clarify, I have not found any problem with the "i" in the project settings, but I would prefer to not see it. Everything else is important - resolution and speed (fps). The main idea is to use
• Movie Studio

  23 answers, most recent on 4/10/2020

  RE: New Project - Movie Settings confusing!
  @jonboy834 Other than what the others have added, to clarify, I have not found any problem with the "i" in the project settings, but I would prefer to not see it. Everything else is important - resolution and speed (fps). The main idea is to use the
• Video Pro X

  16 answers, most recent on 4/17/2020

  RE: How to best deal with Apple (iPhone 11) shot at 30fps vs. 29.97fps
  @Craigster Hi. Does VP-X not give you a choice of frame rate when you create a new project? If it doesn't you should go to your movie settings and un-tick the box that saves the present project settings for new projects. Ray.
• Movie Studio

  28 answers, most recent on 3/28/2020

  RE: Moving/slotting images and transitions in Timeline Mode
  @FF22 Unless you have a simple project with mostly just photos, no music, no overlays (PiP), few titles, do not use Storyboard mode, use Timeline mode. You have to be able to see what you are editing. I have audio and video on separate tracks. I
• Movie Studio

  132 answers, most recent on 8/25/2020

  36 Hours of Testing MEP Premier Settings For Playback and Export.
  Hi all. Prelude. This is going to be lengthy, so please bear with me. You may find it interesting or complete rubbish. First I'd like to say that the moderators here and few regular contributors are very knowledgeable and have helped /are still
• Movie Studio

  59 answers, most recent on 3/7/2024

  RE: No Hardware Acceleration / Encoding
  I have the NVIDIA GeForce GTX 1650 and Intel HD Graphics 4600 built into the motherboard. I have been struggling with the "Mixing Down...no hardware acceleration" problem for quite a while. Here is my solution. Go to Windows Settings / Systems /
• Music Maker

  9 answers, most recent on 3/12/2020

  RE: Trouble After Re-installing & Upgrading to MM 2020 Premium (update)
  John & Jeff, Thank you again for your valuable tips. If, in fact, MAGIX comes back to me with an official response (they are very busy here and it takes them a while to respond) that I must leave the soundpools and other large content files
• Movie Studio

  20 answers, most recent on 3/7/2020

  RE: Error in module "nvcompiler.dll" (Load address: 0x00007FFD574B0000)
  @XICH Hi Movie Edit Pro (MEP) requires use of the Intel i7-7700 integrated graphics chip - HD Graphics 630 - for Hardware Acceleration (HWA) and Preview rendering. It is most probable MEP is trying to use the GTX 1060 which is not supported. The HD
• Movie Studio

  8 answers, most recent on 2/27/2020

  RE: Problems with shimmering of objects during turns in rendered 3D video
  @John-Atwell Hi This is a common problem when 2 cameras in that the frames are out of sync with each other. Movement from one camera is not consistent, frame by frame to the other. Movie Edit Pro only allows video to be moved in one frame
• Movie Studio

  3 answers, most recent on 2/23/2020

  RE: Movie Templates, Movie Edit Pro Premium.
  @emmrecs Hi Jeff, "Limitless Power" is available from the Store. @Douglas-Erwin Good question! In MEP2016 P/P, there were versions of movie templates for different lengths. These subsequently disappeared; I don't know when. I suggest that you ask
• Video Pro X

  2 answers, most recent on 9/1/2020

  VPX and Movie Edit Pro Plus/Premium - Plugins
  Some users have asked about plugins and some other useful programs available for use with Magix VPX11 and Movie Edit Pro Plus/Premium 2020. Below are listings, Video, then Audio, then linked and third party software, of those that I am aware of.
• Movie Studio

  5 answers, most recent on 2/15/2020

  RE: Movie Edit Pro premium freezing, sound continues
  @Coldsnap Hi Thanks for the information. . . . . during playback video suddenly stops and the program freezes . . . . The issue you are having is most likely due to the lack of Hardware Acceleration (HWA) that Movie Edit Pro (MEP) uses to ensure
• Movie Studio

  2 answers, most recent on 2/10/2020

  RE: Audio files are not displayed after opening the program
  Hi, Read the first message of the link below. Magix has on-going problems with the database and this affects MEP. You will need to restart at least once after a wait, as per the instructions, and this, every time you
• ACID

  21 answers, most recent on 2/9/2020

  RE: Audio sample is added automatically--annoying
  (1) You seem to wander and talk a lot. I already outlined I know the different fortes of the different programs and you ramble on about that while ignoring I've been describing the similar functions between them all along. These apps maintaining
• ACID

  21 answers, most recent on 2/9/2020

  RE: Audio sample is added automatically--annoying
   Acid, Vegas, and Sound Forge are different applications for different purposes - not a "Suite" of applications. They each need a UI/UX tailored to the markets they target. So it's actually encouraging that MAGIX is willing to start breaking that
• Movie Studio

  3 answers, most recent on 1/21/2020

  RE: File organisation
  @devil Hi, When you use MEP to import, you are doing so in a project. MEP doesn't know what you want to call the project unless you tell it. By default, MEP proposes today's date. When you import, you are actually making a digital version of the DV
• Video Pro X

  20 answers, most recent on 1/24/2020

  RE: Look at the little sister editor
  @johnebaker Thanks for the specs - there is one item that is incomplete and that is the processor, whatever software you are using to get the details it is only reporting and i7 Kaby Lake processor. Oops... sorry. Didn't notice. Seems that Speccy
• Video Pro X

  20 answers, most recent on 1/24/2020

  RE: Look at the little sister editor
  ​​​​​​Dear @browj2, First of all, thanks for your detailed reply. I may not agree in every point yet, but I appreciate that you're putting so much time & effort in trying to help! Let me answer point by point likewise... I'm using VPX11