• Music Maker

  9 answers, most recent on 4/6/2023

  RE: Objects not recording,reverts back to free version, Asio issues
  Magix crashed again today, right after I chose Magix Asio driver, I could hear good sound through the headphones, but no waveform was produced during the recording and then it crashed. I've been having issues with low sound levels using magix, which
• Other products

  7 answers, most recent on 2/1/2023

  RE: Magix studio deluxe 11
  Hi   I changed the compatibility mode to Windows XP (service pack 2 and 3) and ran the program via administrator however still i have the same issue, i also downloaded ASIO4ALL to see this this would make a difference but no joy, frustrating !! I
• Samplitude

  5 answers, most recent on 11/29/2022

  RE: Recording 48000hz
  @Jeff-Schoenholz I think this depends on your audio hardware. If you don't use an audio interface with ASIO drivers but only the standard audio chipset of your computer, you are probably running into a bottleneck. You could try to increase the
• Music Maker

  6 answers, most recent on 12/3/2022

  RE: Issues with ASIO drivers
  Thanks for the response John. I just ran the older computer through RAM tests (both Windows and Memtest86) which all pass. I recently cleaned the computer prior to installing Music Maker, however, the computer was booting using MBR and so I have
• Music Maker

  3 answers, most recent on 11/10/2022

  RE: Just purchased MMPremium 2023
  @clency-easterling Then please check your audio driver configuration in the program settings. Usually you should select the Music Maker ASIO driver and configure input and output and buffer size by clicking on the Advanced button.
• Music Maker

  28 answers, most recent on 5/17/2023

  RE: Magix Music Maker Not Responding
  ok what the problem was was i had to reload windows 11 windows has a Behringer soundcard driver but you really need to go to Behringer and load there driver wich is out date but works better then win 11 driver i just up graded music maker asio
• Music Maker

  5 answers, most recent on 11/24/2022

  RE: Cordless/wireless headphones...?
  @johnebaker >> I am using JBL Bluetooth headphones Thanks for the brand info, and for the comment about asio -- I knew about its intended usage, but hadn't really registered its significance in this context (if that makes sense).  I'll check
• ACID

  14 answers, most recent on 11/24/2022

  RE: Live Track Record Latency
  Okay, worked like a charm! My live track sync sounds beautiful, latency problems are history. This may have been an easy fix, but hopefully the next people in my shoes can jump right to the solution - check that your (ASIO, low latency) Audio Device
• Movie Studio

  4 answers, most recent on 6/30/2023

  RE: audio overdub on Movie Studio 2023 video
  @VFedo Hi, There may be a couple of problems. I have an M-Audio M-Track connected to my computer by USB. I also have the corresponding M-Audio ASIO driver loaded in the computer and the M-Audio Device Settings are loaded at computer startup. Did you
• Movie Studio

  50 answers, most recent on 10/20/2023

  RE: Help selecting a new PC
  @mikerb Hi Mike. I do find that the exporting (and even importing) of 2.7k (2704 x 1520p) video being missing from both Magix Movie Studio and Video Pro X one of the most dumbfounding absences from the export rendering options. It is a staple of
• Samplitude

  One answer, on 12/6/2022

  Low Latency Driver ills...
  I've just upgraded from 5 to 7, and have had to uninstall the low latency driver accompanying Samplitude X7 Suite. It wouldn't work in anything. I've installed ASIO4ALL, but would prefer the Magix driver.Can anyone point me to a download just for
• Music Maker

  One answer, on 12/28/2022

  Music Maker 2023 Premium SOund Dropping/Skipping
  It seems on playback, my sound cuts out regularly. It plays but sounds like it is skipping. I have increased the buffer in Program Settings but it has not helped. I am using a brand new PreSonusUSB96 audio interface with a Shure SM58 Mic. I have the
• Music Maker

  6 answers, most recent on 12/3/2022

  RE: Issues with ASIO drivers
  @Russell-Cashin Welcome to the Magix user to user forums. Exactly which version and edition of MM do you have? For all recent versions, to change the audio driver go to File>Settings> Program settings (shortcut P) and go the Audio/MIDI tab. On
• Samplitude

  6 answers, most recent on 11/17/2022

  RE: Frustrated with USB Connections
  My USB interface is a Yamaha AG06 Mk2 and I'm using the Steinberg ASIO driver. I can see the green bar going up as I speak into the microphone but after arming the track I click the record button in the bottom but the record fails to get going...duh
• Music Maker

  45 answers, most recent on 5/18/2023

  RE: Music Maker update 31.0.4.50
  The sound is tinny and scratchy on Music Maker Asio. Change it to wave 16bit and the sound is full but it crashes after about 20-30 seconds of playing.. Change it to low latency and it will not work through headphones anymore. Simply CANNOT save a
• ACID

  12 answers, most recent on 10/21/2022

  RE: No sound on soft synths
  @Robert-Joseph Is the Focusrite ASIO driver selected in the Audio Device settings? Are your speakers or headphones connected to your Focusrite interface?
• Samplitude

  6 answers, most recent on 11/17/2022

  RE: Frustrated with USB Connections
  OK the experiment continues! I hooked up my Mackie ProFX6v3 Mixer to my laptop with Samplitude running. All good now! Recording came out fine and I heard the playback fine!!! Of course, I used the Mackie ASIO driver. OK will go back to my EVO 8 and
• ACID

  2 answers, most recent on 1/16/2023

  RE: Multicore Synth Playback
  Ultimately you're at the mercy of the plugins you're using. Not all plugins/synths support multiple cores. Looking at the online help, enabling Track Buffering also enables multiple cores, so should split processing up across additional cores per
• ACID

  One answer, on 3/20/2023

  A tale of two acids: Two songs, one with no audible sound
  Working in Acid pro 11, after rendering some tracks, I went back to a song, and suddenly I couldn't hear any track, despite the fact that I could hear the click track, (The wood block) perfectly.The I went to another song I had rendered and with the
• SOUND FORGE

  4 answers, most recent on 1/15/2023

  RE: Two sound cards - record with one and playback with the other?
  Hey JeffThanks for the info. 😉I'm not using ASIO on my PC at all just now...The way it's set-up, is that I have two pro level audio devices that I can choose from, and both have audio in and out capability.SoundForge doesn't have an option to set
• ACID

  2 answers, most recent on 1/16/2023

  RE: Multicore Synth Playback
  Ultimately you're at the mercy of the plugins you're using. Not all plugins/synths support multiple cores. Looking at the online help, enabling Track Buffering also enables multiple cores, so should split processing up across additional cores per
• ACID

  No answers, created on 1/22/2023

  ASIO4all v2.15 driver issues
  When Acid Pro 365 Version 11.0.2 (build 21) 64 bit is playing back, as the mouse cursor passes over the screen in any panel there is an audible noise and disrupts the audio signal during playback. Also occurs when Magix low latency driver is
• SOUND FORGE

  4 answers, most recent on 1/15/2023

  RE: Two sound cards - record with one and playback with the other?
  @CoLD_SToRAGE ASIO4ALL should solve your problem because it usually shows all inputs and outputs of every sound device in your computer. But it's a generic driver and you might have a lot higher latency times. Alternatively, it looks like there are
• ACID

  9 answers, most recent on 10/31/2022

  RE: Acid Pro 11 - White Noise / static that requires computer restart
  @LeonM Sounds like a Realtek audio driver problem. I would also suggest you install the free demo version of FL Studio which also comes with the FL Studio ASIO driver. You can then select this driver in the preferences.