• ACID

  6 answers, most recent on 5/7/2020

  RE: no sound on playback.
  Hey jim-ballard, do you have chosen the right midi input for the recording track? So are there any visible midi notes in the recorded midi event? By pressing "G" you can easily en-/disable midi inline editing to see if there are any midi
• Video Pro X

  9 answers, most recent on 4/16/2020

  RE: VPX Setting, Adjusting and Analyzing Loudness - Plugins
  @Craigster Hi Craig, Yes, I have Samplitude Pro X3 Suite. I took a look at the Loudness Meter and there is no graph, only the readout, so the two other tools would be helpful. The YouLean Meter can be adjusted to the desired level with the paid-for
• Photo & Graphic Designer

  9 answers, most recent on 4/15/2020

  RE: interacts with Photoshop print function
  @Leonard-Lea I can only repeat here what I wrote before: It is very, very highly unlikely that P&GD is causing any problem to PS, or vice versa. The fact that whatever problem you are now experiencing with PS appears to have started after you
• ACID

  6 answers, most recent on 4/1/2020

  RE: ACID Pro Next and Melodyne
  I just ran into this one myself using AP Next 1.0.3 build 32, was it ever resolved? Fixed in AP 10? I edit two events with Melodyne Editor (4.24.001 64 bit), save the project, and when I open it again ACID has decided to add Melodyne to all of the
• SOUND FORGE

  One answer, on 3/26/2020

  RE: How to drop in an audio edit in the middle of an existing file
  Hi @Frank-Wittosch and welcome to the Sound Forge discussion group. There a few ways to drop additional audio into an existing file. I think the most intuitive way would be to record new lines and takes to a new file (same sample rate and bit depth)
• Movie Studio

  31 answers, most recent on 3/29/2020

  RE: MEP System Requirements
  On the "Overload Optimization" tick box - I can't remember if I had enabled that when I first installed MEP 2020 Plus or not. (That is, if it defaulted to Enabled.) In any event, I disabled it a few days ago, thinking that my system is no longer
• Other products

  One answer, on 3/17/2020

  [Closed] Sony Vegas Pro 9 stopped working
  My Sony Vegas Pro 9 64 bit Windows 10 has stopped working and gives the following error message "The application has failed to start because its side-by-side configuration is incorrect. Please use the application event log or use the command-line
• Samplitude

  2 answers, most recent on 3/10/2020

  RE: Initial setup
  @Andrus-Valvur Hi, Which version? In any event, in Samplitude Pro X3, System Options is at the top like a folder, Audio Setup is the first subfolder below it. There is no option Audio Systems. However, the manual indicates that there is and it must
• SOUND FORGE

  5 answers, most recent on 3/5/2020

  RE: When do you reach for the event tool?
  Thanks @James-Lo the Event mode does have the ripple option. I just did not see it. Good to know and thanks again.
• SOUND FORGE

  5 answers, most recent on 3/5/2020

  RE: When do you reach for the event tool?
  Actually, there is a ripple option under Options->Event->Auto Ripple but that's a different feature. I'm only asking because I have a faint memory of a video where someone was moving events around willy nilly and all the surrounding events
• SOUND FORGE

  5 answers, most recent on 3/5/2020

  RE: When do you reach for the event tool?
  Auto option? Not that I'm aware of, but I don't use the events option much. From my experience, it works very similar to Vegas (and CD Arc), you can use the 'S' key to divide an existing file, make two (or more) events and move, copy/paste, ect. I
• SOUND FORGE

  5 answers, most recent on 3/5/2020

  RE: When do you reach for the event tool?
  Is there an option to have two events automatically make room for an event inserted between them? e.g. say you have events A B and C in a timeline, and you want to move C between A and B. Is there a way to do that without manually making sufficient
• SOUND FORGE

  5 answers, most recent on 3/5/2020

  RE: When do you reach for the event tool?
  For me, mostly CD authoring, but i burn very few CDs these days. Otherwise It is easier to move an event segments around the timeline than copy/paste. X-fades are easy as well.
• SOUND FORGE

  5 answers, most recent on 3/5/2020

  When do you reach for the event tool?
  I remember learning about it a while ago, but have never used it for some reason. In what real-world circumstances does it shine?
• Video Pro X

  9 answers, most recent on 4/16/2020

  RE: VPX Setting, Adjusting and Analyzing Loudness - Plugins
  @Craigster Hi Craig, Yes, I have Samplitude Pro X3 Suite. I took a look at the Loudness Meter and there is no graph, only the readout, so the two other tools would be helpful. The YouLean Meter can be adjusted to the desired level with the paid-for
• Video Pro X

  9 answers, most recent on 4/16/2020

  RE: VPX Setting, Adjusting and Analyzing Loudness - Plugins
  Browj2 -- You are asking some great questions. I just did a Memorial video that included only 1 camera (so video editing was easy), but for audio included: - primary speaker (pastor) with a lapel mic - 4 different speakers on a condenser handheld
• Movie Studio

  26 answers, most recent on 2/10/2020

  RE: Will be off line for a while.
  @browj2 Hi John. The items on the drive are all backed up as it was the backup drive that failed, not my current working drive. I have now transferred all my current working projects onto my third backup drive. Will get a new backup drive to replace
• SOUND FORGE

  6 answers, most recent on 2/3/2020

  RE: Sound Forge 8 to Sound Forge Pro 13 questions before I upgrade?
  Welcome to the Magix Sound Forge community @james-s2596 To elaborate on what James-Lo previously stated I just wanted to check that Sound Forge Pro 13 can still drag and drop over files and 'mix' 'paste' etc and merge files on top of each other to
• SOUND FORGE

  One answer, on 1/29/2020

  RE: Sound Forge beginning user
  Welcom to the Sound Forge community @Randy-Flaum I use SFP (Sound Forge Pro) along with VP (Vegas Pro) for almost all sound-for-picture projects. The SFP included iZotope RX Elements works very well for attenuating BG noise as well as snap crackle
• Video Pro X

  7 answers, most recent on 1/28/2020

  RE: Auto save function.
  @KBLHi Kevin.I don't know if it's because of the auto save but I know I stopped using it years ago because it would sometimes freeze if I was in the middle of a maneuver and the auto save kicked in.Now I am in the habit of saving on a regular
• Off topic

  67 answers, most recent on 8/23/2020

  Suggestion and ideas
  Would it be possible to introduce a favourite artist link on a members page, when you click on the favourite artist link you automatically become a fan and receive an email notification when the member posts a new song. At Acidplanet we had the
• Movie Studio

  3 answers, most recent on 1/21/2020

  RE: File organisation
  @devil Hi, When you use MEP to import, you are doing so in a project. MEP doesn't know what you want to call the project unless you tell it. By default, MEP proposes today's date. When you import, you are actually making a digital version of the DV
• Video Pro X

  22 answers, most recent on 1/15/2020

  RE: VPX11 - Color Space, Color Space Correction, Instruments Meter Setting
  @johnebaker Hi John EB Yes the Zebra stripes in video is very useful and again depends a lot upon the bit depth some cameras shoot at. Some cameras that did video in the past have been very low in bit depth but didn't advertise it. For stills I
• SOUND FORGE

  6 answers, most recent on 1/9/2020

  RE: New Sound Forge 12 build 170 install on New Windows 10 64 bit Crashes
  Hello again RRaud, I've reinstalled SF12 more times that I would care to list. The latest and last attempt was on a clean new Windows 64 OS with nothing else other then the OS and SF12. Still fails if opening more than one mp3 using the file