• Samplitude

  8 answers, most recent on 10/12/2024

  RE: [Solved] NO SOUND from Samplitude Music Maker
  @dan-s Hi In Music Maker program setting Audio/Midi tab check that the program is using the Magix low latency 2016 or Magix ASIO driver (Music Maker 2023) and under the Advanced settings the audio device input and outputs are selected see examples
• Music Maker

  6 answers, most recent on 12/3/2022

  RE: Issues with ASIO drivers
  I have found the low latency Magix 2016 seems to work pretty well. Finally!! Thanks.
• Samplitude

  16 answers, most recent on 12/28/2022

  RE: MIDI Playback Issues - No ASIO Driver found, only Magix Low-Latency
  @Gertjan-Zwart Click on Settings or Control Panel to open the Magix Low Latency driver settings and activate your audio devices.
• SOUND FORGE

  3 answers, most recent on 12/8/2022

  RE: White noise on audio playback
  Does this happen on all file types or just MP3s for instance. If it happens on all file formats (PCM, MP3, AAC, ect.), this sounds like (no pun), the Magix Low Latency 2016 driver issue.. removing the Low Latency driver usually fixes it. However you
• SOUND FORGE

  164 answers, most recent on 9/27/2023

  RE: Feedback on SOUND FORGE Pro 16
  AFAIK, the 'Magix low latency 2016 driver' is not installed by SF Pro It was primarily an issue on PCs with SF Audio Studio. If AS was installed at some point, it may remain and certainly does have the symptoms.
• Music Maker

  9 answers, most recent on 4/6/2023

  RE: Objects not recording,reverts back to free version, Asio issues
  @Eleyan These crashes have likely to do with your audio devices. Are you still using the Presonus Audiobox? Did you install Universal Control from Presonus? It's very important that you install the correct audio drivers. It's not guaranteed that
• Samplitude

  10 answers, most recent on 5/4/2023

  RE: Latency - Samplitude Pro X7 Suite
  @Barth_01 Does this happen with all tested VSTi? Or did you, by chance, just select instruments presets with a longer attack time? Probably not, but you never know. Have you tried another audio driver? For example Magix Low Latency? Can you make a
• Music Maker

  12 answers, most recent on 3/21/2024

  RE: Music Maker not working
  @Riley-Coach Usually, reinstalling will do nothing, because the program settings are saved separately. If you install the software again, it will revert to the settings before the uninstallation. I recommend you restart your computer regularly by
• Samplitude

  One answer, on 3/8/2023

  RE: Finale Message
  @Joe-Rogers It looks like Finale automatically loads the Magix Low Latency ASIO driver which was installed with Samplitude Music Studio. This is not a problem if it works for you. You can likely change the driver in the Finale program settings if
• Samplitude

  One answer, on 12/6/2022

  Low Latency Driver ills...
  I've just upgraded from 5 to 7, and have had to uninstall the low latency driver accompanying Samplitude X7 Suite. It wouldn't work in anything. I've installed ASIO4ALL, but would prefer the Magix driver.Can anyone point me to a download just for
• Music Maker

  4 answers, most recent on 2/2/2023

  RE: ASIO drivers
  @RoryS You can change the sample rate of your project in the Project Settings under the File > Settings menu. Your USB microphone needs to be activated as an input in the Music Maker ASIO or Magix Low Latency settings by clicking on the
• Samplitude

  7 answers, most recent on 4/8/2023

  RE: The Program is Taking Over the Midi
  @johnebaker I strongly believe that Magix Low Latency is completely identical (except name and logo) with ASIO4ALL 2.13. In my experience ASIO4ALL always needs exclusive access to the sound hardware which means that no other program will be able to
• Samplitude

  One answer, on 6/25/2024

  RE: How to record
  @roger-solnevik In case it's still blocked, please allow microphone access for desktop applications in the Windows security
• Samplitude

  8 answers, most recent on 3/2/2024

  RE: No master audio signal in midi track only project
  @Luca8650 If the Juno plays the MIDI notes it is connected fine. But Samplitude needs the audio signal back from the Juno as well. Can you show us a screenshot of your Audio Setup settings in Samplitude, too? Usually, you should have selected an
• SOUND FORGE

  7 answers, most recent on 2/3/2023

  RE: Noise after installing Sound Forge 14
  I concur with @SP.. From what you describe, that does sound like the 'Magix Low Latency 2016' issue, which was a relatively common issue in SF Audio Studio 14 & 15.See this thread: https://www.magix.info/us/forum/audio-issue--1290482/ btw,
• SOUND FORGE

  7 answers, most recent on 2/3/2023

  RE: Noise after installing Sound Forge 14
  Hi @David-Bertelli, and welcome! I work for the manufacturer, and i'm positive this is the Magix Low-Latency 2016 driver causing the issue. It is safe to remove it...this was an issue for quite a few people, and it's resolved it for all of them.
• SOUND FORGE

  9 answers, most recent on 5/2/2023

  RE: Buggy. Introduces noise into good audio
  Regardless of the larger file size, does the noise also occur with PCM files?Do you also have a version of SF Audio Studio installed? There was a Magix Low Latency 2016 driver problem that caused system wide noise.. The low latency driver is not
• Samplitude

  27 answers, most recent on 6/19/2024

  RE: How to set up midi instruments so they play, can be monitored,recorded
  @doug_mccarron It's not set up this way because this needs manual configuration of ASIO driver. The software is set up so you can record with a microphone and external instruments with minimal CPU load using the standard Windows sound system which
• ACID

  11 answers, most recent on 6/22/2023

  RE: Performance tweaking in Windows 11
  @Marcus_Svensor I found the following articles. Might be worth to check them out: Disable All Network Connections Disable Real Time Antivirus Protection Make Sure The Audio Interface Is Not Used By the System Reboot Before The Show Disable all the
• Samplitude

  One answer, on 3/8/2023

  Finale Message
  I have Magix Samplitude Music Studio 25.0.0.32 (DP3) on my WIndows 10 computer. I also have Finale, which I recently upgraded from version 25 to version 27.0.3.137. Since the upgrade, when I open Finale I get this message: Finale for Windows MAGIX
• Samplitude

  7 answers, most recent on 4/8/2023

  RE: The Program is Taking Over the Midi
  Samplitude Music Studio 2023. The audio drivers in my music program are ASIO, Direct Sound and WASPI. MAGIX has taken over the Mic source and output source both with the Low Latency whatevers. I use a program called NotePerformer for audio output.
• Music Maker

  One answer, on 6/16/2022

  RE: [Solved] Rendering Audio Loop from BeatBox Pro
  Guys - After posting this, i saw a previous post that didnt come up in the search. WITH THE RESOLUTION:   Also check that you are using the Magix Low Latency ASIO driver in the Program settings, Audio/Midi tab. John EB   It was this. Thanks John
• SOUND FORGE

  3 answers, most recent on 11/22/2023

  SFAS 17.0.2 - Record Options/Play Unselected channels when recording
  Hello, I am running SF Audio Studio 17.0.2 (Build109) on a W11 PC with a realtek audio card connecting a microphone and external stereo speakers, set up in preferences as a 'Magix Low Latency 2016' Audio Device type. While attempting to record new
• Samplitude

  4 answers, most recent on 7/16/2022

  RE: After Windows udate, sound device not listed in system setting/audio
  @Michael-Valdez Have you configured the inputs and outputs in your Magix Low Latency driver settings?