• Movie Studio

  20 answers, most recent on 9/18/2020

  RE: Zoom Assistance
  @Austin-Miseque Sorry about that delay; had to get dinner! Gotcha. Use the "Camera-Zoom" effect (I don't use Size position for this, because we're zooming, not resizing or positioning). In summary, use the keyframe feature to set 1/the start
• Video Pro X

  12 answers, most recent on 9/17/2020

  RE: VIDEO PRO X 11 audio in external editor
  @CubeAce Hi Ray, We covered this before, more than once, in detail. I told you to not use proxies when you tried right-click on the audio part. Not using proxies, with one exception, any external editor that I have tried (all Magix), nothing shows
• Movie Studio

  272 answers, most recent on 4/1/2021

  RE: Movie Edit Pro 2021 is out - New features
  @Scenestealer Hi Peter. I did change a picture I put up within minutes of posting because I realised It was from the wrong project. I currently have eight different Tech tips master copies covering Audio, Video, Effects, Editing, Photography,
• Rescue Your Videotapes!

  36 answers, most recent on 4/26/2021

  RE: Driver installation for MAGIX K0065 (Windows 10 64-bit)
  @Alxcos A rather late update but I thought I would post my trial and tribulations here ;P After a bit of Googling I ended up taking the cover off and taking a look inside. I managed to unloop the tape and when I pressed eject, with a bit of
• Movie Studio

  13 answers, most recent on 8/23/2020

  RE: New User Here and I Have Some Questions Regarding the Timeline Tracks
  @browj2 To be honest I had never realised that VMS numbered the tracks "upside down". Probably because the numbers occupy a very small screen area and it's the adjacent track title which can be renamed to reflect something more useful that I use.
• Video Pro X

  20 answers, most recent on 1/6/2021

  RE: VPX11 - Effects tab - Audio effects - Snap Markers
  @johnebaker @CubeAce Good morning, The file is: Snow Falls_normal.mxcOGG which you should have as it's part of the free songs. Yesterday, I tried deleting the HDP and H0 files, and then importing the song into a new project. Actually, I did this
• Movie Studio

  11 answers, most recent on 6/20/2020

  RE: mute 1 clip
  @richard-taylor Hi Richard, For comparing video clips, you have two monitors, Preview and Source. On the Source Monitor, click on the hamburger menu (upper left) and switch to "Comparison image: Selected Object." In my screen shot, the video on
• Movie Studio

  11 answers, most recent on 6/20/2020

  RE: mute 1 clip
  @richard-taylor Hi Richard, For comparing video clips, you have two monitors, Preview and Source. On the Source Monitor, click on the hamburger menu (upper left) and switch to "Comparison image: Selected Object." In my screen shot, the video on
• Movie Studio

  3 answers, most recent on 5/23/2020

  Masking an effect
  I'm using Movie Edit Pro. My layers are as follows: 1) Video of my son holding a plastic tube. 2) Video of a pulsating lightsaber. What I want to is come up with a way so that when he spins the light saber infront of himself **edit to add** while
• Movie Studio

  10 answers, most recent on 5/4/2020

  RE: Where are my movie files
  @Schmacker Hi, I have done 2 tutorials on basic editing and 1 about Getting Started that you should review. The last part of Getting Started covers multiple movies. First off, you should read the Quick Start chapter in the manual. The first page
• Movie Studio

  23 answers, most recent on 4/10/2020

  RE: New Project - Movie Settings confusing!
  @jonboy834 I have no idea what VPX is (?) but the link seems to refer to something to do with Vegas? ? VPX = Video Pro X is the Magix big brother of Movie Edit Pro and it may suit you better given your experience in other NLEs. It contains the
• Movie Studio

  28 answers, most recent on 3/28/2020

  RE: Moving/slotting images and transitions in Timeline Mode
  @FF22 Hi . . . . As far as size/length, I guess I was hoping the new Magix could handle it . . . . MEP is more than capable at handling 2000 images - the most I have done was in a timelapse sequence of 3400+ images. @browj2 comment . . . . 2000
• Video Pro X

  7 answers, most recent on 3/21/2020

  RE: Viewing top Video camera track. VPX defaulting to show lower track
  @Craigster By bottom track, I presume that you mean lower down on the screen, thus a higher numbered track. If you have a video on track 1 and another on track 3, you will see the video on track 3, not track 1, If you place cards one on top of
• Video Pro X

  7 answers, most recent on 3/21/2020

  RE: Viewing top Video camera track. VPX defaulting to show lower track
  @Craigster By bottom track, I presume that you mean lower down on the screen, thus a higher numbered track. If you have a video on track 1 and another on track 3, you will see the video on track 3, not track 1, If you place cards one on top of
• Movie Studio

  2 answers, most recent on 2/12/2020

  Is this normal behavior of Magix?
  Dear video friends, Is this normal behavior of Magix?In 2017 I bought the boxed version of Magix Video deluxe Premium. Video deluxe is the same as Movie Edit Pro, just another name for the same product. In the advertisement it said that it would
• Video Pro X

  20 answers, most recent on 1/31/2020

  RE: VPX11 17.0.3.63 More Bugs - Moving Cut Point, Object Trimmer Problems
  @johnebaker Hi John, Thanks for taking a look. The bottom left controls allow you to nudge the left Object Border of the selected clip to the left and right on trimmed clips, the same as I showed in the other part for dragging the Object Border
• Video Pro X

  20 answers, most recent on 1/24/2020

  RE: Look at the little sister editor
  @phonebooth Hi, I just remembered that I wanted to check something on this and comment. That is ideal, but should not have to be the case. So long as you are not on this camera when its clip runs out, you should be able to continue. However, I
• Video Pro X

  22 answers, most recent on 1/15/2020

  RE: VPX11 - Color Space, Color Space Correction, Instruments Meter Setting
  @sasiuk Hi Dédé, Thanks for the detailed explanation. It would be good if Magix updated its manual to properly cover all of this, in language that most users could understand, and with details about source files (camera format), hardware and
• Movie Studio

  35 answers, most recent on 12/12/2019

  RE: Possible Bug During Save Project
  @johnebaker Hi John. The most economical way to combat reverb ( I can't believe your room is so large you actually have echo unless you are Lord John XXX with some sort of stately Pile 😁) is to use close microphone techniques. Lavaliere or headphone
• Samplitude

  2 answers, most recent on 11/30/2019

  RE: Samplitude video support for AVCHD .mts files in Pro X4
  Hi John. I am covered with embarrassment! You are absolute right Samplitude does open .mts files. Even though they aren't listed in the video file types. And I now remember what my exact problem was!! If I open the video (.mts file) and mix up some
• Movie Studio

  9 answers, most recent on 11/18/2019

  RE: How do I add black, color bars and 10 second countdown?
  @David.Rambaldi1 Did you download and install everything under Help, Install extra content, and then again Download extra content on the first screen that pops up? If so, then you'll have solid colour objects and various colour swatches under
• Movie Studio

  195 answers, most recent on 2/12/2026

  RE: Any problems to expect if upgrading CPU/MB/ and operating system?
  @wongck I can't find another pdf covering this and never I'd seen this one before. As all the versions share the same graphics engine I have to assume similar requirements must be met for best results. It does seem to give a bit more insight into
• Movie Studio

  28 answers, most recent on 10/24/2019

  RE: MEP 2020 TK2 Bug
  @Richard-Curtis Whew! I knew that I had written down my process for 8/Super 8 Sound films but couldn't find it. Found it, but I didn't cover everything, so here is my detailed work flow. 1. Getting similar subject material into a movie - 8mm only or
• Movie Studio

  2 answers, most recent on 9/27/2019

  Reduce size of photo placed in movie
  It's been several years since I've used Magix Movie. Just bought Movie Edit Pro. I've placed a photo in my timeline and need to reduce the size so it doesn't cover up the video behind it but I've forgot how. I couldn't find the answer in the Help