• Movie Studio

  32 answers, most recent on 2/6/2022

  RE: Trial Version - Missing Codec
  @Arthur-Rasmussen Welcome to the Magix user to user forums, so not a contact for any Magix staff. Codecs have to be paid for/licenced by the software manufacturer so are often not made available in Trial versions. However, I confess to being a
• Video Pro X

  23 answers, most recent on 1/27/2022

  [Closed] Neat Video Resolution
  I have a problem from the very beginning of MAGIX Video Pro X13. I was unable towork with the new program and still has bugs that prevented me from working. Theneat plugin I care about the most and that's the only reason why I decided to buyyour
• Movie Studio

  7 answers, most recent on 1/16/2022

  RE: Cannot Import videos
  Thanks for the answer, The files play normal anywhere else. I read the Support page on here and a few posts in the forum, in which they said it can happen because video editing programms go deeper in the code of the video, you know what i mean. But
• SOUND FORGE

  3 answers, most recent on 1/15/2022

  RE: No sound out after upgrade to build 121
  rraud, After I found your response a few hours later, I went back to the system with SF. I selected the magix audio device and I was able to play an .mp3 (as well as a .wav). Its playing at full fidelity but is not really usable because of the delay
• Music Maker

  157 answers, most recent on 12/30/2025

  RE: Wishlist for the next Music Maker!
  Lets say I want to hear track 10 (which is midi and has vst) playing some other sound (patch). When I close the vst, the name of the new patch doesn't update into that field which has the name of the patch (or sample). At the starting screen there
• Movie Studio

  67 answers, most recent on 2/8/2023

  RE: Uploading 3D video to YouTube?
  @CubeAce Audio sync problems only occur with variable frame rate files while being edited within the program. Not sure your point here, Ray. Obviously, my i3 isn't going to play the file on the timeline smoothly, but a quick pre-render of a speaking
• Web Designer

  One answer, on 1/12/2022

  RE: I cannot get thru the installation process. I can't install
  @Barry-Pasonski Hi and welcome to the forum. . . . . I typed in the product serial # successfully . . . . asked to enter the coupon code . . . . Did the serial number begin with P3- and did you enter it this in the activation dialog that appeared on
• SOUND FORGE

  5 answers, most recent on 1/9/2022

  RE: Problem with SF Pro 15 build 161 and scripting
  Thanks for the warm welcome and the replies. The header posted by xman_charl works with my scripts using build 64. I'd be grateful if someone could confirm that it works with build 161. The whole script now looks like this: using System; using
• SOUND FORGE

  5 answers, most recent on 1/9/2022

  Problem with SF Pro 15 build 161 and scripting
  I'm a long term user of Sound Forge and have some scripts set as buttons to quickly change volume. Here is an example: using System; using System.IO; using System.Windows.Forms; using SoundForge;public class EntryPoint { public void
• Movie Studio

  5 answers, most recent on 1/8/2022

  RE: Trying to register and activate the software
  @darkstar5d Hi and welcome to the forum We need more information: Computer specification and program version, see this topic for what is required and please quote processor and graphics card make/model in full - I would suggest you put this
• ACID

  13 answers, most recent on 1/1/2022

  RE: Where is the Tempo (BPM) stored in an MP3 file?
  @Stoli I made the following script that will show the filename and BPM stored in the ACID metadata of each file openend in Sound Forge in a MessageBox. Could you try it in your Sound Forge with some of your files? You open the Script Editor under
• Movie Studio

  23 answers, most recent on 12/28/2021

  RE: Added Fanfare
  @rickduley Hi Rick This is beginning to sound like the .mts files are from a Blu-Ray disc, and is the DRM kicking in as a spoiler. John EB  
• Movie Studio

  2 answers, most recent on 12/28/2021

  RE: Wanted: Newbie Checklist For Preparing Multiple Video Types For MEP
  @julesvern Hi and welcome to the user to user forums. You may get varied answers to this question as everyone has their own needs and preferences. So, personally. My checklist begins and ends with my cameras. I make sure they are all set to the same
• Movie Studio

  25 answers, most recent on 12/28/2021

  RE: Quick Time Movie Export (Advanced) Not Working
  @CarpentersMate @johnebaker @me_again Hi Mike. I'm afraid I'm not in your world of having to create files from old screen ratios or from trying to grab video from analog sources so my experiment was to grab one of my own files and change it's screen
• Music Maker

  13 answers, most recent on 12/29/2021

  RE: VITA 2 - How many instruments should VITA 2 have?
  Thank you for your reply John. I did all of that and am still unable to open VITA instruments or the Editor for VITA. I have a service ticket opened with Magix Support and am hoping they will find a solution for me. I wrote them the following - Than
• Movie Studio

  8 answers, most recent on 12/25/2021

  RE: [Closed] The activation code is incorrect
  @Leonardo-Klemes Hi and welcome to the forum . . . . when I try to import a video into the program it just says "the activation code is incorrect".  . . . . Did you also purchase the HEVC codec and it is asking for the serial number for it? If so
• Movie Studio

  17 answers, most recent on 12/24/2021

  RE: MEP 2016 Plus Captured AVI Files - Codecs
  @CarpentersMate Hi Mike. Seasons Greetings. I think maybe because avi did not support different aspect ratios and was a Microsoft developed codec. I think you would expect that response from an Apple tech department. I would not personally worry
• Photostory

  6 answers, most recent on 12/23/2021

  RE: What happened to my ability to edit individual photos?
  Thanks Jeff. Learning more about Settings helps and I made some changes. But Reset didn't work in my original story. I created a second Story, saved it, and exited Photostory. When I reopened the file, I have all of the manual capabilities. With
• MAGIX

  5 answers, most recent on 1/5/2022

  Important: MAGIX is reachable over Christmas and New Year!
  Dear community, The year is slowly coming to an end. This means that we - the MAGIX Team - are saying goodbye for the moment. But that doesn't mean we're leaving you alone. Our voluntary forum moderators will be available to help and advise you over
• Video Pro X

  4 answers, most recent on 12/21/2021

  RE: please help
  @antonio-gonzales You need to do as Ray advised and email infoservice@magix.net, with full details of the problem, and request their help. I think you should do that as soon as possible, i.e. today, because I know at least some of Magix' staff begin
• Other products

  8 answers, most recent on 12/20/2021

  [Closed] Missing serial number and a site designed to firewall customer service
  Upgraded From Movie studio to Vegas Pro through MAGIX. Comes with Boris Primate. > Field says : "Boris FX Primatte StudioActivation key:- Please contact support! Unfortunately we were unable to assign a number to you! (contact who? time
• Movie Studio

  2 answers, most recent on 12/19/2021

  RE: Display clip duration
  @Ian-Schwartz Hi Ian, Vegas Pro and Video Pro X are closer than Vegas Pro and Movie Edit Pro Plus/Premium in features. Strangely, the information that you want is not shown (it would be nice to have) without either checking the properties or opening
• Video Pro X

  17 answers, most recent on 12/21/2021

  RE: Edit Volume Curve (Version 13)
  @Rod-L Hi Rod, I'm assuming that you turned on the object Volume Curve and not the track curve. Then you can do as Ray indicated or go to Effects tab, Audio Effects, General, and (with the audio object selected) you'll see volume in the keyframe
• Video Pro X

  8 answers, most recent on 12/20/2021

  RE: Source monitor: (1) see waveform - (2) range gets messed up
  @CubeAce Hi Ray, Yes, that is it. Yours works. It shows the Media start (51:20) and end (1:10:38) with a length of 19:18 correctly, and then the Range with start at 0 end at 19:18. In VPX, selecting a range in the Source Monitor and dragging it to