• SOUND FORGE

  7 answers, most recent on 2/3/2023

  RE: Noise after installing Sound Forge 14
  I concur with @SP.. From what you describe, that does sound like the 'Magix Low Latency 2016' issue, which was a relatively common issue in SF Audio Studio 14 & 15.See this thread: https://www.magix.info/us/forum/audio-issue--1290482/ btw,
• SOUND FORGE

  7 answers, most recent on 2/3/2023

  RE: Noise after installing Sound Forge 14
  Hi @David-Bertelli, and welcome! I work for the manufacturer, and i'm positive this is the Magix Low-Latency 2016 driver causing the issue. It is safe to remove it...this was an issue for quite a few people, and it's resolved it for all of them.
• ACID

  11 answers, most recent on 6/22/2023

  RE: Performance tweaking in Windows 11
  @Marcus_Svensor I found the following articles. Might be worth to check them out: Disable All Network Connections Disable Real Time Antivirus Protection Make Sure The Audio Interface Is Not Used By the System Reboot Before The Show Disable all the
• SOUND FORGE

  3 answers, most recent on 11/22/2023

  SFAS 17.0.2 - Record Options/Play Unselected channels when recording
  Hello, I am running SF Audio Studio 17.0.2 (Build109) on a W11 PC with a realtek audio card connecting a microphone and external stereo speakers, set up in preferences as a 'Magix Low Latency 2016' Audio Device type. While attempting to record new
• Samplitude

  One answer, on 3/8/2023

  Finale Message
  I have Magix Samplitude Music Studio 25.0.0.32 (DP3) on my WIndows 10 computer. I also have Finale, which I recently upgraded from version 25 to version 27.0.3.137. Since the upgrade, when I open Finale I get this message: Finale for Windows MAGIX
• Samplitude

  7 answers, most recent on 4/8/2023

  RE: The Program is Taking Over the Midi
  Samplitude Music Studio 2023. The audio drivers in my music program are ASIO, Direct Sound and WASPI. MAGIX has taken over the Mic source and output source both with the Low Latency whatevers. I use a program called NotePerformer for audio output.
• Music Maker

  One answer, on 6/16/2022

  RE: [Solved] Rendering Audio Loop from BeatBox Pro
  Guys - After posting this, i saw a previous post that didnt come up in the search. WITH THE RESOLUTION:   Also check that you are using the Magix Low Latency ASIO driver in the Program settings, Audio/Midi tab. John EB   It was this. Thanks John
• Samplitude

  8 answers, most recent on 3/2/2024

  RE: No master audio signal in midi track only project
  @Luca8650 If the Juno plays the MIDI notes it is connected fine. But Samplitude needs the audio signal back from the Juno as well. Can you show us a screenshot of your Audio Setup settings in Samplitude, too? Usually, you should have selected an
• Video Pro X

  20 answers, most recent on 3/20/2024

  RE: ASIO drivers and audio handling in general.
  @browj2, @Kraznet Hi . . . . What's the secret? . . . . Good question, tipping it on its head, what else is running at the same time on your PC's that is not running on mine? The only programs I had running were VPX 15, Screencast-o-Matic and a
• SOUND FORGE

  One answer, on 3/14/2023

  RE: Loud Noise When Pausing or Stopping Playback
  Hi @Stephen-Berry, I would first suggest updating to the latest Audio Studio-15 build, which I think is '121'. Secondly, if you are using a lossy type source file, (MP3 or AAC for instance), try enabling "Always proxy compressed formats" in the
• SOUND FORGE

  3 answers, most recent on 12/8/2022

  RE: White noise on audio playback
  didn't they test this thing! Not on your specific PC @Jonathan-Lloyd2719 . Have you tried other WAVE files, and MP3s. The Low Latency 2016 driver issue happens right after a new install, but I recall it was more prevalent with Audio Studio 15..
• Samplitude

  7 answers, most recent on 4/8/2023

  RE: The Program is Taking Over the Midi
  Well. I've downloaded the program along with about 50,000,000 gigs of God knows what. After numerous hours of it installing, I clicked on the program icon to open it...went 'eek, what does all this mean?" followed by, "this I'll have to learn when I
• Samplitude

  One answer, on 2/8/2023

  RE: Audio playback while recording.
  @SirWilson-Brown Did it work correctly in the previous version you used? Have you compared the audio settings in both versions? You must select an ASIO driver in the system settings of Samplitude. The monitoring mode below the ASIO driver selection
• SOUND FORGE

  4 answers, most recent on 11/20/2022

  RE: Sound Cuts Out for a momnet
  @David-Roberts8669, if the behavior is happening globally, I would suspect the Magix Low Latency 2016 driver which is installed with Sound Forge Audio Studio. The driver is known to produce noise and other annoyances in other applications with audio
• Samplitude

  4 answers, most recent on 7/16/2022

  RE: After Windows udate, sound device not listed in system setting/audio
  @Michael-Valdez Have you configured the inputs and outputs in your Magix Low Latency driver settings?
• Music Maker

  11 answers, most recent on 5/2/2022

  RE: [Solved] Various issues
  @coneman Hi The Muma location error -usually means there is an external audio interface ASIO driver mismatch. If you have an external USB audio device then disconnect the device before starting Music Maker. Once MMM is started, plug the device and
• SOUND FORGE

  2 answers, most recent on 4/3/2022

  RE: [Solved] Sound covered with hiss in Win 11
  Hi @DJWE, this 'sounds' like (no pun) the Low Latency noise issue. The noise could be caused by the Magix Audio Studio's Low Latency 2016 driver... Uninstalling the driver usually fixes it. See this comment from
• Music Maker

  4 answers, most recent on 10/5/2022

  RE: how to download your music after you make it?
  @puddin86 Older versions of Music Maker used the Magix Low Latency driver which will use the audio device of your computer exclusively. Then no other application can play sound. It could be that you have selected this driver in the program settings.
• ACID

  3 answers, most recent on 8/17/2022

  Audio PlayBack
  Acid Music Studio version 11 - During playback when Magix low latency 2016 is selected there is static noise on the playback. When microsoft sound mapper is selected there is no sound during playback?
• Music Maker

  One answer, on 3/14/2022

  RE: [Solved] White Noise
  @amburrito Which audio driver is selected in the program settings of Music Maker? If it's Magix Low Latency it is normal that you cannot use other programs at the same time as Music Maker. This is how the driver is developed. White noise could be a
• ACID

  No answers, created on 1/22/2023

  ASIO4all v2.15 driver issues
  When Acid Pro 365 Version 11.0.2 (build 21) 64 bit is playing back, as the mouse cursor passes over the screen in any panel there is an audible noise and disrupts the audio signal during playback. Also occurs when Magix low latency driver is
• Music Maker

  7 answers, most recent on 11/19/2022

  RE: Audio recording through guitar amplifier is not working.
  Hi SP, It's been a while. I decided to give Premium Edition 2023 another try. There was an echo and the Record Audio track only recorded this echoing sound. After much fumbling I narrowed it down to the ASIO driver.If you find other people with this
• Music Maker

  45 answers, most recent on 5/18/2023

  RE: Music Maker update 31.0.4.50
  For what it's worth, Windows 10 i7 Realtek. I tried ASIO4All a couple of weeks ago and again a half hour ago. Sound is slightly better but not by much. In any driver there is always a "presence" of distant noise. No noise exists in simple wave
• Samplitude

  4 answers, most recent on 11/5/2022

  RE: Volume Issue
  Thanks for your response, it does look like it's audio driver related. My Samplitude is using Magix Low Latency 2016 (MLL). Soundforge was using Microsoft Sound Mapper. Switching Soundforge to MLL, I get the same volume levels.  Regarding all the