• ACID

  7 answers, most recent on 12/5/2025

  Stem Maker Removed Details Discussion
  Hi everyone, There's quite a few duplicate posts on the forum due to the recent discovery that Stem Maker has been removed from Acid Pro 10 with not so many definitive answers to questions.  After some investigations , here is some information I
• Music Maker

  14 answers, most recent on 5/21/2021

  RE: Delay Issue
  @Brooke-Harvey You can try to decrease the delay by decreasing the buffer size inside the Magix Low Latency or ASIO4ALL driver settings and the Audio buffer size inside the program settings. Try something lower than 512 and 8192. This will need a
• Movie Studio

  One answer, on 5/17/2021

  RE: CAN NOT ACTIVATE MPEG 4 CODEC. I DO HAVE THE CODE.
  @John-Hunt Welcome to the Magix user to user forums. First, please DO NOT POST ALL IN CAPITALS! It is considered to be the forum equivalent of SHOUTING and may cause other users to ignore your post. Unfortunately, you have given us minimal
• SOUND FORGE

  2 answers, most recent on 5/14/2021

  RE: tracks
  Sound Forge can do that, but it is far from a fast intuitive 'environment' and would require cutting, pasting, sub-mixing, internal and third-party plug-ins, Options after the fact would be minimal as wellAs @emmrecs stated, multi-track software is
• SOUND FORGE

  6 answers, most recent on 5/8/2021

  RE: I have inherited a cd copy of s.f. pro 10 missing serial.
  @loyd-wiermans Welcome to the Magix user to user forums and your first post, albeit one with absolutely minimal information! I'm going to guess that you now have a copy of Sound Forge Pro 10, but no serial number. If so, only the original owner of
• Movie Studio

  34 answers, most recent on 4/16/2021

  RE: RGB Colour Identification in Raw Clip
  @browj2 Hi John The image I originally posted is about as bad as it gets, which I see didn't escape your attention😀. Yes, I apply NV to virtually every Super 8 clip, but this image is raw without effects of any kind. I did the Cookie Cutter trick
• Movie Studio

  14 answers, most recent on 4/12/2021

  RE: hevc movie export problem - unwatchable second part of video file
  @Scenestealer Hi Peter. No reason beyond I prefer the look of the exports from OBS over telling it to use VBR and the difference in the exported file sizes not so great. VBR to my eye means I see more blockiness and more banding of graduations than
• Photostory

  22 answers, most recent on 4/6/2021

  RE: Encoding Failed
  @Robert-Wells Hi The MXV option is shown in the image below - this is a custom Magix video format and can be re-imported into a project with minimal loss of quality. HTH John EB
• SOUND FORGE

  20 answers, most recent on 5/19/2021

  RE: Sound Forge Pro 15 builds tutorials - can this be disabled?
  Watch this YouTube video in 4K to see how it happens in Sound Forge 15 and 14 on my desktop. SFTutor behavior in SF 15 and 14 My laptop runs Sound Forge 12 and it exhibits the exact same behavior. This is not an installation issue, nor a bug, it is
• SOUND FORGE

  One answer, on 3/22/2021

  Remote Recording
  Remote recording is not necessary. Just activate the recording command and minimize the Sound Forge window. Fixing problems is more important.
• Music Maker

  22 answers, most recent on 2/26/2021

  Constant freezing and issues with software
  Software freezes EVERY single use, especially when using the MIDI or various instruments in the application. Audio occasionally stops playing when selecting instrument preset, also program freezes completely, though in task manager it does not
• Movie Studio

  4 answers, most recent on 2/7/2021

  Program hangs hard when trying to access program settings.
  Movie Edit Pro v20.0.1.73 (UDP3) Windows 10 Pro, 64 bit, 16GB Ram, Intel i7 @1.9GHz File -> Settings -> Program hangs Movie Edit Pro so hard, that it cannot be killed from Task Manager. The window then can't be moved or minimized, and nothing
• SOUND FORGE

  5 answers, most recent on 2/4/2021

  RE: Sound Forge Audio Studio 15
  Hi, my friend. When the program is minimized and then maximized, the problem stops happening. I will do what you said, thank you very much.
• Movie Studio

  15 answers, most recent on 2/1/2021

  RE: Burn failure - videodeluxe.log shows missing 'mc_demux_mp4_ds.ax'
  @Larry-Burkholder Hi . . . . I will try to find a virus-free Handbrake and experiment with the ‘converter’ process . . . . No need to locate one, I gave you the direct link to the software creators site - you will see in my comment that the text is
• Movie Studio

  15 answers, most recent on 2/1/2021

  RE: Burn failure - videodeluxe.log shows missing 'mc_demux_mp4_ds.ax'
  Hello emmrecs, Thank-you for taking time to draw me a picture – it helped! I will eventually try this method for comparison. Referring to the jagged-lines problem – please note that there are NO jagged lines when I play this rendered video (as mp4)
• SOUND FORGE

  One answer, on 1/19/2021

  New bugs in Sound Forge Pro 14
  Two new bugs have appeared recently in Sound Forge Pro 14 (64-bit build 130). I'm using a Dell computer running Windows 10 Pro (build 1909) with 64 GB of RAM. A) You lose the File menu if your audio windows were maximized, the last time you closed
• Movie Studio

  29 answers, most recent on 1/18/2021

  RE: Upgrade Path for software
  @Diverjon Hi, I do like the easy ones. You have downloaded the trial of the basic version - there are no 360 effect in this version. Uninstall this and download the Plus or Premium trial version. See the Comparison Table. Note that the Plus version
• Movie Studio

  11 answers, most recent on 1/9/2021

  RE: H.264 output to bluray is jittery on moving objects
  @johnebaker So, an off topic (but related) question if I might. I sometimes see the "jittery" (jumping) video that you mentioned in motion shots of TV movies streamed over the web that I record via screen capture. I have experimented with capture
• ACID

  2 answers, most recent on 1/9/2021

  Ongoing Issues
  Hi, i wonder if anyone can help me, i have been using the Acid products for many years ever since the early days my last being Acid pro 7, but I have never had so many issues as when i have updated to Acid pro 10 ? i don't usually post in forums but
• Audio Cleaning Lab

  12 answers, most recent on 1/5/2021

  RE: double speed
  The above download is a (44.1/16) single-channel mono PCM file. It plays back at what sounds to be normal pitch and speed on my PC with Sound Forge Pro. FWIW. I recently did a vinyl restoration project and RX Elements was able to remove a lot of the
• ACID

  3 answers, most recent on 1/6/2021

  RE: Broken GUI Acid Pro 10.0.4
  Unfortunately I have tried closing and reopening in several ways and none of them solve this issue. The only thing I can do is right click and select these functions in the drop down menu. Sometimes the X for close will work, but minimize and
• ACID

  3 answers, most recent on 1/6/2021

  Broken GUI Acid Pro 10.0.4
  The Minimize Button, Restore Down and Close buttons in the top right corner do not function. I have to right click and select these in a drop down menu. For example, when you click "Minimize" it wants to engage the "Restore Down", but does not work;
• Movie Studio

  7 answers, most recent on 1/3/2021

  How to reset Magix Movie 2021 to default as I have lost a screen
  While working on a large project, I have caused Magix to open a large workspace and lost my timeline. I can not minimize it to see if it is hidden. I have used the Crl + Shift and double clicked the short cut...it does not work Help please   thanks
• Video Pro X

  23 answers, most recent on 12/23/2020

  RE: Suggestion -- load times -- the splash screen takes over windows
  @johnebaker Thanks, John. Boy, that is much faster than mine! Even uninstalling all of Magix software, cleaning the registry, reinstalling VPX from a new download, it still took 3+ minutes for VPX to load, and without a 2nd monitor, I can do nothing