• Video Pro X

  20 answers, most recent on 3/20/2024

  RE: ASIO drivers and audio handling in general.
  @johnebaker Hi John EB, My settings were quite different from yours, so I switched to them. I have a song on track 1, that is all. I cannot get anything like what you get, more like 2 seconds when I change the volume in the mixer before it
• SOUND FORGE

  13 answers, most recent on 9/6/2023

  RE: Batch-Custom saved Volume preset disappears after restart
  This batch was created from scratch only in SF16. The +4dB volume only disappears if you close SF16 and then reopen. The volume will still be there but the saved +4dB preset disappears.
• Music Maker

  8 answers, most recent on 9/14/2023

  RE: What should volume be set to when finalizing songs?
  @dpizza This cannot be set generally. Compare it with songs where you like the volume and loudness. And carefully check the optimization options if you publish your music to streaming services or else they might lower the volume or loudness by a
• Movie Studio

  5 answers, most recent on 7/5/2024

  RE: Splitting Bug?
  But wait, there's more. I have just found that, with MMS 2025, if one uses the object trimmer to set up a fade at either end, only the video is faded; the audio is left at full volume, even when the video and audio are grouped. I think this is a
• Music Maker

  17 answers, most recent on 9/16/2023

  RE: joining loops to make 1 loop
  @philthedoctor Hi, Further to what @gjonny showed you, in the image below I show both object and track volume curves. The points on the object volume curves were made by turning on Automation (button in red circle) so you can see that there a lot of
• Samplitude

  2 answers, most recent on 2/22/2024

  RE: [Solved] What mode to avoid inadvertently interfering with the PLAY CURSOR?
  No, it's a tower. Windows 11 Pro, 64bit, 13th Gen Intel(R) Core(TM) i7-13700   2.10 GHz, 64 GB RAM. New, lots of space, SSD, etc.Thank you for your response! I was fooling with this tonight (I'm in Germany, it's 6:45 pm here) and I think I've
• SOUND FORGE

  9 answers, most recent on 4/27/2024

  RE: Soud Forge does not receive a signal from the wireless microphone
  Hi SP., I have checked that I have everything configured correctly in ASIO4ALL and its control panel recognizes the wireless headset correctly. The thing is that it's as if Sound Forge had some problem starting recording, because I've noticed the
• Samplitude

  4 answers, most recent on 11/5/2022

  [Solved] Volume Issue
  Hi, I've been experiencing some issues with volume levels and wondering if anyone can provide any insight. I'm creating a track in Samplitude Pro X7 and mastering it for export. Everything sounds fine within Samplitude but when I play the exported
• Movie Studio

  4 answers, most recent on 9/23/2023

  RE: Un-split a track?
  @john-x Hi. Draw volume curves on the audio track to control volume, then if the clip gets cut and one side has to be dragged back into position then the audio levels will still be there. Double click on the volume line to produce a node. Drag the
• Movie Studio

  9 answers, most recent on 2/23/2024

  RE: Key frames in audio
  @Greg123 Hi . . . . I simply cut audio path on the timeline in couple places and adjusted volume in each part . . . As @browj2 commented that is a different method, however IMHO, it is potentially fraught with issues when you start moving objects
• SOUND FORGE

  3 answers, most recent on 9/30/2024

  SF18 Build 21 scripting bug Solution Reminder
  The following script works to normalize sound in the data window: using System; using System.IO; using System.Windows.Forms; using SoundForge; public class EntryPoint { public void Begin(IScriptableApp app)
• SOUND FORGE

  3 answers, most recent on 5/7/2023

  [Solved] Please - Help About Mix Channels
  Good morning guys !Forgive me if this message gets too long, I don't know how to express myself and I'm using google translator.I'm a hobbyist, not a professional. Sound Forge's manual talks about things professionals use, not common users. If
• Music Maker

  20 answers, most recent on 8/11/2023

  RE: questions about working with Music Maker.
  @Former user DN-e1 doesn't automatically map curve 7 to its volume controller. To map the curve to the controller, open the GUI of DN-e1 and make a right click on the volume controller and select MIDI learn. Then play your song. The first controller
• Music Maker

  6 answers, most recent on 10/8/2023

  I don't have any pointer tools... can't put points on volume...
  No cross fade, copy brush... just downloaded... most recent version
• Movie Studio

  21 answers, most recent on 11/26/2023

  RE: Movie Studio 2024 Suite - audio is suddenly lost
  @AAProds G'day Al. Thank you for adding one additional way of adjusting a sound track I was not aware of. The addition of a sound mute button is something my older version doesn't have but it does have a general mute button. I hadn't thought about
• Samplitude

  4 answers, most recent on 3/12/2024

  VSTi Volume Tracking vs Velocity Parameter
  I'm using Samplitude Pro X6 and I've noticed that all VSti plugins are not created equal in how they treat the velocity parameter in midi files. To test this out, I created 10 midi tracks, and in each one coped the same midi file, with a 12 single
• Music Maker

  17 answers, most recent on 9/16/2023

  RE: joining loops to make 1 loop
  @browj2You said "You want track volume curves." Can you please explain why he would "want" to do this?  It's certainly another way to do a volume curve. And visually, in the Arranger, the curve appears to be more obvious than the combined loop
• Movie Studio

  30 answers, most recent on 9/1/2023

  RE: Screen Recording question
  @Former user Hi Gid. If you are not listening in surround sound. You could set the RealTek mixer to quad sound and plug the stereo sound output to the rear channels. You will then have a slider to control the volume to your amps again without it
• ACID

  2 answers, most recent on 1/9/2024

  No sound when loaded completed files
  When loading completed files back into Acid Pro 11 there is no volume, all the levels are showing but no sound. Samples can be heard but when loaded onto existing file they cannot. have deleted and reloaded Acid pro 11 but no change. Was working
• Video Pro X

  13 answers, most recent on 6/19/2025

  RE: plugin NewBlue Infinite Looks
  None of the plugins that came with the Premium version of Video Pro X 16 are working for me. I doubt I’ll ever be able to use them – so I’ve decided I won’t buy any Magix product again.Based on my experience, not a single Magix product comes without
• Movie Studio

  21 answers, most recent on 11/26/2023

  RE: Movie Studio 2024 Suite - audio is suddenly lost
  @EstMladen HiMladen. Somehow when you produced a separate audio track you also muted that audio track. Click on the speaker symbol to unmute. You also don't seem to have your program set to display the waveforms of your audio track which would give
• Samplitude

  12 answers, most recent on 12/14/2024

  New update is available for Samplitude Pro X8 and Pro X8 Suite
  A new update is available for Samplitude Pro X8 and Pro X8 Suite, which can be installed via the auto-update directly inside the program or manually from the following links: IMPORTANT: Requires Windows 10 or 11. Samplitude Pro X8 19.2.0.24218
• Samplitude

  13 answers, most recent on 3/8/2024

  RE: Samplitude Pro X Suites: Reinstallations Issues?
  I've never used the snipping tool but I will try to install that to do the screenshots. Also, I'm hoping that Pro X version 1 has something like a loudness compensation filter, which I need when playing my high res and high efficiency two channel
• Samplitude

  2 answers, most recent on 6/28/2024

  RE: mixer faders colors / how to assign or change
  @VivaMaretta-Giorgini The color switches to yellow, orange or red if you select in the right click context menu of the fader to controls the AUX level instead of the volume/MIDI velocity. The color depends on whether you select Direct Out,