• Video Pro X

  44 answers, most recent on 7/2/2020

  RE: Rendering an 11 mintue video takes 8 hours +
  @TechWizard . . Both of my monitors are connected to the 1080 . . . . I agree with John and Ray - connect each GPU to a different monitor. I have the Display Port from the Intel connected to my primary monitor and my Nvidia to my secondary monitor
• Video Pro X

  10 answers, most recent on 6/15/2020

  RE: Is this a new program or will it be an update option?
  @emmrecs Hi Jeff. That's good to know. I was referring to the general feel and use of the new program though. Having now gone through four very expensive internal sound cards over the years I have given up on my new build. The new motherboard has as
• Video Pro X

  10 answers, most recent on 6/15/2020

  Is this a new program or will it be an update option?
  As Video Pro X now comes with a new 'Infusion Engine'. does that make it effectively a new program or an update? I ask because I'm not sure. I know those of you that have already downloaded it possibly paid to upgrade. Am I correct? The other reason
• Movie Studio

  10 answers, most recent on 6/5/2020

  RE: Capture using MEP 15
  Thank you for the long reply. :-) It wasn't a TI Fire wire however I found one in another old box and it was, so I replaced it. Unfortunately nothing has changed with the 20MB - 6 seconds stop. I tried another tape and got the same result, but it
• Samplitude

  2 answers, most recent on 6/1/2020

  How to install without using a Disc on a Mac.
  I purchased the Acid Music Studio, which came with an install CD but I bought a new computer and it doest have a port for a CD. How do I install this?
• Movie Studio

  20 answers, most recent on 5/30/2020

  RE: Please format help!!
  @Scenestealer Hi Peter. The page I found was only an example as I obviously don't know which set Matthew has and why I'm saying look for the TVs manual, although in this case it may not have helped as manuals don't often specify bit rate information
• Music Maker

  No answers, created on 5/27/2020

  Midi Synchronization - running as master or slave
  Hi, been playing around with Music Maker for a while (amongst many other daws/sequencers), and have got most things figured out, but I can't seem to get midi sync working either as a master or slave.. anyone had any luck with that? I've tried both
• Video Pro X

  16 answers, most recent on 6/18/2020

  RE: Firewire IEEE 1394 to USB 2 or 3
  @AAProds Hi Alwyn . . . . I really would just use your workhorse to capture your DV tapes onto an external drive . . . The only way to do that is capturing the Composite vide and audio, assuming the camera has th connections, via USB
• Video Pro X

  16 answers, most recent on 6/18/2020

  RE: Firewire IEEE 1394 to USB 2 or 3
  I have a Thunderbolt 3 port. And I have 30 days to test the unit from B&H.  I only have to pay return shipping if it doesn't do what I want, but I am very hopeful it will.   @keruxjeff Does your laptop include a Thunderbolt port? ... I would
• Video Pro X

  16 answers, most recent on 6/18/2020

  RE: Firewire IEEE 1394 to USB 2 or 3
  @keruxjeff Regarding...The linked to device is for a MAC and although Thunderbolt 3 and USB C use the same connector they are, AFAIK, not totally universal. I have a Thunderbolt 3 port. So fingers crossed it will work. :-) I'll post the results
• Video Pro X

  16 answers, most recent on 6/18/2020

  RE: Firewire IEEE 1394 to USB 2 or 3
  @keruxjeff Does your laptop include a Thunderbolt port? Presumably so if you are considering that device. In which case it should work, I think. My only reservation is about the included firewire card. From my experience and for reliability I would
• Video Pro X

  16 answers, most recent on 6/18/2020

  RE: Firewire IEEE 1394 to USB 2 or 3
  @keruxjeff Hi The linked to device is for a MAC and although Thunderbolt 3 and USB C use the same connector they are, AFAIK, not totally universal. A USB C device eg eternal hard drive can be plugged into Thunderbolt 3 and the MAC will recognise the
• Video Pro X

  16 answers, most recent on 6/18/2020

  RE: Firewire IEEE 1394 to USB 2 or 3
  Having been in the Mini DV world for many years, and now transferring VHS via an analogue capture solution (in my case, an internal capture card), I would strongly strongly strongly recommend finding a Firewire PCMCIA card for your laptop. DV
• Video Pro X

  16 answers, most recent on 6/18/2020

  RE: Firewire IEEE 1394 to USB 2 or 3
  @keruxjeff Hi . . . . Does anyone know what equipment I would need to go from Firewire IEEE 1394 to USB? Is it even possible? . . . . It is possible, however the proper converters are difficult to find. If your laptop has a PCMCIA card slot then you
• Rescue Your Videotapes!

  No answers, created on 5/13/2020

  No Video and confusing audio.
  Hello! I recently bought RYVT 8th Edition (Red and white device), at first everything worked fine, but after an update of Win 10 the program refuses to capture any video. I have tried to uninstall and reinstall the program with the CD that came in
• SOUND FORGE

  12 answers, most recent on 5/18/2020

  RE: sudden buzz flat line appears when recording in Sounds Forge 10
  I tried plugging in the Focusrite audio interface directly into my Laptop USB 3.0 port, and it was able to record fine for 21 minutes before the flat line event showed up in Sound Forge. In the example I showed above, that flat line event came just
• SOUND FORGE

  12 answers, most recent on 5/18/2020

  RE: sudden buzz flat line appears when recording in Sounds Forge 10
  What about Thunderbolt3 docking bricks? Is there a known problem with recording through a Thunderbolt3 docking brick, where the Focusrite audio interface USB cable is plugged into the Thunderbolt3 docking brick, and the docking brick is plugged into
• Movie Studio

  22 answers, most recent on 5/4/2020

  RE: What exactly does MERGE MOVIES do?
  @FF22 Hi . . . . I am on the Tab for Part1. Do I have to now Merge Part2 and then Part3 into Part1 . . . . The safe way:- Select part 1 Select file Manage project, Export movie, Magix Movie file.... Save the project giving a meaningful
• Movie Studio

  22 answers, most recent on 5/4/2020

  RE: What exactly does MERGE MOVIES do?
  @FF22 Hi . . . . I am on the Tab for Part1. Do I have to now Merge Part2 and then Part3 into Part1 . . . . The safe way:- Select part 1 Select file Manage project, Export movie, Magix Movie file.... Save the project giving a meaningful name Repeat
• Video Pro X

  7 answers, most recent on 4/25/2020

  RE: Video Pro X11 on old PC
  @discburn Hi Seamus. I would think you would need the i7 model for the UHD support with the 16gig of ram or i5 with a ram upgrade and at least a 500gig hard drive for enough working space for the program. Both graphics cards on offer seem
• Movie Studio

  21 answers, most recent on 4/19/2020

  RE: downloadable ver. Movie Edit Pro 17 Plus
  @emmrecs@emmrecs I've not had problems with any soft synths as such but I have INTAKT Player that won't load and that is vst3 based I think as it was a new plugin after 2008. I don't have any problems with vst3 but really early Steinberg vsts made
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  Interesting. On my AMD box, all SATA ports are usable as RAID or other. (Chose the Array drives in a BIOS Utility.) But booting into a C: Drive on RAID is problematic, even with spinning drives. I just keep a simple C drive, install Apps on D, and
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  @pmikep Hi Mike. What actually happened was I could not use SATA ports 1 & 2 at all. Raid drives were put in ports 3 & 4 to make the C: drive and my two WD black hard drives ran independently on ports 5 & 6. As I didn't have any
• Movie Studio

  132 answers, most recent on 8/25/2020

  RE: 36 Hours of Testing MEP Premier Settings For Playback and Export.
  It sounds terribly complicated. But the line about "... all SATA ports run at RAID mode together" makes me think I'm on the right track with respect to SSD on a single boot drive. (If one really needs RAID, there are hardware cards one can buy with