• Movie Studio

  7 answers, most recent on 12/16/2022

  RE: Brightness/Contrast/Gamma Controls-Unwanted linkage
  @browj2 @CubeAce John, thanks for the video, but I disagree, they are linked. You move the mid and the low is changed. As you say: If the Gamma selections were linked, they would just be fighting with each other. That is exactly what is happening in
• Movie Studio

  9 answers, most recent on 2/24/2023

  RE: How to edit a track in details
  @Jane1 Hi. I am a little surprised by this question as you seem to have been doing this for quite a while. These are my personal suggestions. Personally I would not use MEP for this but a dedicated audio editing package. There are plenty of good
• Movie Studio

  11 answers, most recent on 9/9/2022

  RE: problems with the external audio (on different track)
  Hi Jeff, The format is .wav and there is music in it (Classical), and...yes, there was a huge distortion. But actually, you solved the problem for me, because as you mentioned it should be about 16 bit, while I tried to put there 32 bits! I have
• Movie Studio

  31 answers, most recent on 11/22/2022

  RE: Audio Buzzing/Crackling | Please Help
  @Marc-Goder Hi Marc. The audio bit rate change is also a good catch. Something I have never seen before but will assume that drops with volume change as opposed to time passing. It is still being recorded at a constant frame rate
• Movie Studio

  11 answers, most recent on 9/9/2022

  RE: problems with the external audio (on different track)
  @Gideon-L Hi, Make sure that you're using the Object Volume Curve. See this: John CB
• Movie Studio

  11 answers, most recent on 9/9/2022

  RE: problems with the external audio (on different track)
  @Gideon-L Hi Gideon. Movie Studio should be able to handle standard 32 bit wav files but they require much more motherboard ram cache. Increasing the amount of buffers in the audio section of the program setup should help but don't increase them by
• Movie Studio

  7 answers, most recent on 2/13/2024

  RE: how to fade music in and out
  @Mary-Stutzman Hi The fade in out for the start and end of the audio clip is the same as for images and video, use either: the Fade in/out transition  drag the handles indicated in the image below (the start handle has already been moved to create
• SOUND FORGE

  One answer, on 12/23/2022

  RE: Trying to organize and delete presets in tools
  Seasons greetings and welcome to the Magix Sound Forge users community @Richard-Hanley. Firstly, I do not have Win 11 to test what you are experiencing.Are you referring to Direct X or VST plug-is?. 'Volume' and other Direct X presets are removed
• Movie Studio

  3 answers, most recent on 12/14/2022

  RE: Debug your programs before you send them out or pay your customers to.
  @Dean-Gotcher You are going back a bit to infer the use of a 'Grannies Tranny' used mainly in the days of analog recording to ensure there were no phase anomalies when a stereo broadcast signal may have been played on a mono transistor radio or the
• Movie Studio

  14 answers, most recent on 8/24/2022

  RE: Wave file wave form is tiny
  @browj2 Hi John. You only have 20 db of gain available using that method and the volume gain is still way too low. The file itself is not even re-scanned, calculated and re-sampled and then re-written. Using the normalization right click on the
• Movie Studio

  23 answers, most recent on 6/14/2023

  RE: Editing audio on the timeline
  @Tony-Haack Hi Tony, I gave you two long messages about doing Voice Over in this thread. Read them again. The best place to do VO is right in the video editor as I described because you can also make adjustments to the video part if necessary. ME3
• Movie Studio

  31 answers, most recent on 11/22/2022

  RE: Audio Buzzing/Crackling | Please Help
  @johnebaker Hi John. Or for the same reason as for video - the less information to encode the higher the compression, now if the thunder was a full orchestra in full swing the bitrate it could be very different. You could be right. AAC is far more
• SOUND FORGE

  4 answers, most recent on 8/16/2022

  RE: Record Screen
  Oi Paulo-Ramos. Tudo bem? Se deseja gravar áudio que sendo reproduzido na tela do computador, você precisa habilitar Mixagem estéreo. Vá até Configurações de Som, Avançado, Todos os dispositivos de som, clique em Mixagem estéreo e Permitir. É
• Movie Studio

  11 answers, most recent on 9/9/2022

  RE: problems with the external audio (on different track)
  @Gideon-L I think you might be after this icon: Put the mouse pointer on it, which will change to a crooked pointing finger, then drag it vertically to adjust the volume of that track.
• Movie Studio

  26 answers, most recent on 8/20/2022

  RE: Sound Mixing problems
  @CubeAce Hi Ray, Why is it possible to have two lots of recorded volume and pans on a single clip? One from the sliders and one from the key frame editor? Should one not overwrite the other? I see that you still haven't watched my tutorials on
• Movie Studio

  31 answers, most recent on 11/22/2022

  RE: Audio Buzzing/Crackling | Please Help
  @Marc-Goder Hi Marc. The audio bit rate change is also a good catch. Something I have never seen before but will assume that drops with volume change as opposed to time passing. It is still being recorded at a constant frame rate
• Movie Studio

  26 answers, most recent on 11/20/2022

  RE: Movie Edit Pro - Audio crackling when crossfading video files.
  @FernandoBadler Hi. Yes had exactly the same problems as yourself but fixed it using the method I gave you above because of the problems I mentioned, but only used the video program to export the sound as two separated wav files (16 bit 48kHz) and
• Video Pro X

  15 answers, most recent on 11/29/2023

  RE: GOYO Voice Separator Noise Reducer Plugin for VPX and Movie Studio
  @Scenestealer Hi Peter, As they say, people will more easily/readily watch a poor video with great audio than a great video with poor audio. How long should an image be shown on screen with no audio before one gets tired of seeing it. I use 3
• SOUND FORGE

  20 answers, most recent on 5/23/2024

  RE: Issue with Sound Forge Pro 16 and scripting
  I deleted the custom preset and I changed EffectOptions.EffectOnly to EffectOptions.DialogFirst. Then I ran the script. The Volume-Dialog opened. I created the preset and saved it under a name. Then I canceled the process. Then I changed
• Video Pro X

  2 answers, most recent on 9/1/2022

  RE: Audio problems with Movie Edit Pro Premium
  browj2 thank you for responding. I am using version 21.0.2.138 (UDP3). I appear to be having 2 separate audio problems. In one of those problems yes, the audio is part of the original clip. With the second problem, it is when I add audio, a song for
• Movie Studio

  53 answers, most recent on 11/13/2023

  RE: Movie Studio 2022 cannot separate multiple audio tracks
  Just "upgraded" (questionable), from Movie Studio Platinum 17 to Movie Studio 2022 Platinum. In 17 I would add media, which was a recording that contained two audio tracks. It would automatically put the video and each audio track in its own row on
• Movie Studio

  7 answers, most recent on 12/16/2022

  RE: Brightness/Contrast/Gamma Controls-Unwanted linkage
  @AAProds Hi Al, I can't see anything that would lead me to see that the settings are linked. It's one or the other. Below shows the meters with reset, then Gamma Mid = 100 Below, reset, Gamma Low = -80, then switched to Mid which keeps the same
• Movie Edit Now

  15 answers, most recent on 1/11/2023

  RE: audio bit rate decreased from 384 to 160 kbps
  @wmcalister @johnebaker @browj2 @AAProds Hi. If you are using RED book mp3s they are typically 16 bit although some non conforming mp3 files can go as far as 20 bit. AAC files are 24 bit so a much better dynamic range although most of that is
• Video Pro X

  148 answers, most recent on 4/18/2023

  RE: General discussion on add-ons
  @browj2 with the takeover of FXHome by Artlist almost 2 years ago, there has been no improvements that I know of for Hitfilm Pro. Just about everyone who were core to FXHome and Hitfilm have moved on. I wonder why. Artlist closed down the user forum