• Music Maker

  10 answers, most recent on 4/3/2020

  RE: can a .MMM file from 1997 render in M/M? ..if no then what pgm plz?
  Yes it works. I just tested it with with demo files from August 2000 (Music Maker 6). But there are some Dlls missing, so sound effects (Echo, Distortion, Delay etc.) will be ignored. If your file used a lot of effects it will sound different. Of
• ACID

  4 answers, most recent on 4/3/2020

  RE: STEM MAKER in Acid Pro 10 says .mp3 will take 18hrs to separate . . .
  Dear @Versez, how long is the file you are trying to separate? We recommend to use a uncompressed file format like wave for the best quality. If you have the possibility to a wave file of the track, please try this. Best regards, Marco
• ACID

  3 answers, most recent on 3/30/2020

  RE: Making mixes with MP3 files
  if there is a video I'm not aware of it, sorry. However it's a very simple task. 1. create an Audio track in AP9 (ctrl -Q) 2. drag and drop one song at a time into the Audio track. a note here, AP( will want to start 'Beat Mapper' every time you
• Audio Cleaning Lab

  No answers, created on 3/30/2020

  Unable to export wave file to cd
  When attempting to export a file to a cd a notice appears saying, The Files./var/folders/u1/u1Sw+n4pECOZbG7gRoV19++++TV-Temp-/NEW_0303_02_17_24_14_426.wav Can not be created ! Please check to see if the directory has a written permission. What can I
• Movie Studio

  12 answers, most recent on 3/27/2020

  RE: Issues with new version: Losing pointer sync, drop out of sound track
  @FF22 If the system bogs down on playback then yes, activating proxy files will help. you could try using the lightning symbol to reduce frames as well. If all is well don't bother. Sometimes slowdowns are also caused by the audio as strange as that
• SOUND FORGE

  18 answers, most recent on 3/22/2020

  RE: Sound Forge 6.0 has stopped working
  -16db would be an RMS normalization setting. Maybe SF AS just has 'Peak' normalizing like VP, typically set to -0.01 dBFS). Or if a file has one peak close to 0.0, little to no volume boost would occur with peak normalize. Many folks like the free
• SOUND FORGE

  18 answers, most recent on 3/22/2020

  RE: Sound Forge 6.0 has stopped working
  I downloaded/installed the basic version of SoundForge and no problem trimming or fading but when I try to Normalize the file there's nothing I can select or do to make it louder. I'm used to the preset in 6.0 of 'Music' that was -16db I believe and
• SOUND FORGE

  3 answers, most recent on 3/18/2020

  Version 14 - Vocal Detection & Wave Coloring
  This new software platform has many bugs. Some of the more glaring ones are the crashes that occur when trying to use the afore mentioned features. It's not that I can get to it to use it, it is that the moment the button is pressed, the software
• ACID

  One answer, on 3/16/2020

  RE: ACID PRO NEXT
  Dear @Karm, have you used a mp3 file? We know there is a bug with stem maker and mp3. Hopefully we will fix that with an future update. In the meanwhile you could use another file format, like wave, which we suggest. If your file is not available in
• SOUND FORGE

  5 answers, most recent on 5/13/2020

  RE: [Closed] Bad Crumbs - Failed setting up crumbs
  @johnebakerthanks for the information regarding Sound Forge MAC. I originally purchased Sound Forge MAC to edit wave files on my MacBook and per your website specifications page, Sound Forge MAC is compatible with Mojave. I needed a software program
• Movie Studio

  One answer, on 3/5/2020

  RE: DirectSound Error
  @Keith-Pillsbury Hi Keith. Direct sound is not the most efficient method of getting sound within MEP. Go to File \ Program settings \ Playback and set the audio to use the wave driver instead and try that. Make sure it is connected to the correct
• SOUND FORGE

  2 answers, most recent on 3/4/2020

  RE: Recording vinyl LP's to USB Flash Drive
  Welcome to the Sound Forge community @Brad-Orr Playback the record though a phono preamp for the correct RIAA EQ curve and record it though your soundcard or interface to Sound Forge and save it as a 44.1kHz, 16 or 24 bit stereo PCM WAVE
• SOUND FORGE

  2 answers, most recent on 3/3/2020

  RE: Sound Forge Audio Studio 12.6 will not playback after Windows 10 updat
  Hi rraud, thank you for your questions. Answers (and solution!) in italics. So... SF opens normally but will not play an audio file? - Yes. Not only that, but I can do thinks like cut and paste. Does the cursor, time and meters indicate any playback
• Other products

  5 answers, most recent on 2/25/2020

  RE: Unable to open a VIP file saved last year
  John / Jeff,   Thankyou for that Everything update and I will now download. I have though taken on board those comments that John made in that important third paragraph in the first reply. Since that reply I have actioned two shortsih recordings
• Other products

  5 answers, most recent on 2/25/2020

  RE: Unable to open a VIP file saved last year
  John Thankyou again for your helpful reply. Whilst I fully understand your comment about the ‘two different animals’, what at the moment I cannot get my head round is why there is no ‘WAVE’ file in the folder of my recording this morning. I guess
• SOUND FORGE

  3 answers, most recent on 2/19/2020

  Sound file cutting out
  I’m using SF Pro 13 Build 131 Win. 10 Im having 2 problems during recording One, my wave file will stop then come back. Fortunately when I play back nothing is lost It has kept recording the whole time and the wave just joins itself. The 2nd is
• SOUND FORGE

  One answer, on 2/12/2020

  RE: Does not finish loading
  @Raymond-GahanWelcome @Raymond-Gahan If someone here one here does not have a solution, contact the Magix' Customer Service Sales Team which may be able to help you one way or another. I have not encountered this or read of an instance that I can
• SOUND FORGE

  9 answers, most recent on 2/22/2020

  No more recording after update Windows 10
  Using Soundforge 13, I did a (rather large) update of windows 10 this morning.After and during the update, there were numerous restarts and after the last one, I tried to record an album through the Optical in of my soundblaster ZXR. That worked
• SOUND FORGE

  7 answers, most recent on 2/6/2020

  SF 11 Pro Problems in Windows 10
  I am a heavy user of Sony Sound Forge Pro 11 build 299 (SF). I have used it successfully since mid-2016 on a Dell Inspiron 3650 with an Intel Core i5-6400 CPU @ 2.790GHz, with 16.0 GB RAM. Recently, I have encountered a suite of problems that lead
• SOUND FORGE

  7 answers, most recent on 12/2/2023

  RE: WaveHammer 2.0 disappeared after SF Pro 13 update
  Is it listed in "Fx Favoirtes> Organize> VST" ? And/or is it listed and check marked in "Options> Preferences> VST Effects " ? The Plug-in path is stated as: C:\Program Files\SOUND FORGE\SOUND FORGE Pro 13.0\MAGIX
• Movie Studio

  6 answers, most recent on 2/4/2020

  RE: Importing video from Icecream get no vocals
  Hi, I've done various changes to try and get the sound to work. Firstly I've updated my Magix Movie Edit Pro Premium to the latest version being 19.0.2.49 (UDP3). I've enabled the Stereo Mix. However, I am using an external microphone which I know
• ACID

  6 answers, most recent on 1/21/2020

  RE: Am I alone in thinking that MAGIX has bitten off mor than it can chew
  Hi All, I am new to MAGIX products and this may be the cause of the issues that I am having. I come from Ableton and Sonar but I wanted to know a bit more about ACID loops. ACID Loops are just Wave Audio Files with metadata chunks in them. One
• Video Pro X

  22 answers, most recent on 1/15/2020

  RE: VPX11 - Color Space, Color Space Correction, Instruments Meter Setting
  @sasiuk Hi Dédé, Thanks for the detailed explanation. It would be good if Magix updated its manual to properly cover all of this, in language that most users could understand, and with details about source files (camera format), hardware and
• Video Pro X

  22 answers, most recent on 1/15/2020

  RE: VPX11 - Color Space, Color Space Correction, Instruments Meter Setting
  @browj2 Hi John Thanks for starting these two threads. It is one of those areas that we would like to understand better but never make the time to explore. I could have added some things earlier but have not had the time to write something coherent.