• Movie Studio

  4 answers, most recent on 12/8/2018

  RE: General Advice on longevity of Digital Video Formats
  What a brilliant analysis. But first it seems I have found a solution in case anyone else has a similar issue. I played the same clip back but using Windows Media Player instead of my default VLC and the clip plays perfectly. I have now looked for
• Video Pro X

  53 answers, most recent on 12/20/2018

  RE: [Feedback] How do you like version 16.0.2.304 ?
  @MAGIX_Redaktion Hi Mathias, I have updated the list. Some of these are quite simple to fix. The list is getting longer: Fix the preview of icons under Templates, Design Elements, Collages - presently shows only the Cover icon - collage.png for all
• Other products

  One answer, on 11/29/2018

  Slow previe in Sony Mivie Studio - only happened recently
  Hope someone can help. I recently upgraded my laptop so that I would get better previewing with Movie Maker. To begin with it was great (a few weeks) then suddenly I'm down to 2fps and a two second lag - quite unusable, obviously! I use Avast and
• Movie Studio

  41 answers, most recent on 12/7/2018

  RE: How do I make LOGO STINGERS
  Hi, Group = Link. The correct term is Group.   As in almost all Windows programs, to select more than 1 thing, hold down the Ctrl button and click on each one. It will highlight or, in MEP, turn yellow. If, when you select one object in MEP, others
• Video Pro X

  22 answers, most recent on 11/16/2018

  RE: [Feedback] How do you like version 16.0.2.288?
  @MAGIX_Redaktion Mathias, I really like some of the new features - layer colours, designating target track for importing, and flexible track handling. However, we still have the outstanding list of problems that need to be resolved. Here is the
• Movie Studio

  14 answers, most recent on 11/9/2018

  RE: preview window to FULLSCREEN mode? Every time really jumpy!
  Hi Davy. Something doesn't look right. How do you get 9 gig of physical memory? Memory modules go 4/8/16 gig and multiples thereof. Then there is Available Physical Memory of 904 MB. Is that with MEP running or just booted from idle? I have 16 gig
• Movie Studio

  One answer, on 10/8/2018

  RE: MTS audio
  Just a follow-up on the previous post. Went back through forum and retried this posting about activating the expansion pack from another thread. I had looked at it earlier, but the menu options were not the same, so I did not go through with it. At
• Photostory

  11 answers, most recent on 10/13/2018

  RE: Photostory Deluxe 2018
  Hi Larry, Further to Jeff's excellent points, here are a few more comments: 1. I treat almost all photos with PaintShop Pro and a plug-in called Athentec Perfectly Clear. This gives my photos more pop, sharpens them and corrects exposure. I also may
• Movie Studio

  16 answers, most recent on 11/11/2018

  RE: MEP2019 - patch 209 - previous list of bugs/problems for updating
  Point 1. My startup screen is a bit bizarre I think but I'm not sure. The oldest project I've worked on comes up first but the last version of that project is top of the list. Then the second to last project but again with the last version showing
• Movie Studio

  5 answers, most recent on 9/20/2018

  RE: Re-render all the film again from beginning to end
  It does exist in other video rendering software but when you mix the two with MAGIX Movie Edit Pro, the quality of the picture drops and is noticeable. I remove UOPs from all my DVDs I then send my copy to my ProLiant-MicroServer-Gen8 home network,
• Movie Studio

  17 answers, most recent on 9/17/2018

  RE: Movie Edit Pro 2017 Plus - 'Pre-loading'
  Hi all. Whenever I click play which I obviously do a lot during creation and editing, it always does the 'pre-loading' blue line at the bottom next to cpu usage. I hate that, it means I get delayed playback, albeit it's only a second. Is there
• Movie Studio

  17 answers, most recent on 9/17/2018

  Movie Edit Pro 2017 Plus - 'Pre-loading'
  Hi all. Whenever I click play which I obviously do a lot during creation and editing, it always does the 'pre-loading' blue line at the bottom next to cpu usage. I hate that, it means I get delayed playback, albeit it's only a second. Is there
• Video Pro X

  21 answers, most recent on 6/26/2020

  RE: Hardware Acceleration for HEVC encoding
  @johnebaker That suggests you have the Windows version of the drivers installed - did you download the Intel Driver Assistant and Installer and run it. Yes, it says everything is up to date. And like I said before, I do get the "Graphics
• Movie Studio

  4 answers, most recent on 9/10/2018

  RE: Compression of mpeg video is too high
  @Extreme Hi . . . . is there any other way of doing this so that I can get better quality? You see even after setting all to its highest it is still very compressed as per attached sample and yet the video is only 45min long . . . . No - for a 45
• Movie Studio

  11 answers, most recent on 9/8/2018

  Movie edit pro won't start on 3 different PCs
  I have Magix Movie Edit Pro 2016. Unfortunately, due to the issue, I am unable to find out exact version numbers since I cannot get into the software. I have tried reinstalling multiple times, and nothing has helped. I have the software installed on
• Movie Studio

  21 answers, most recent on 11/27/2018

  RE: Movie Edit Pro - New version 2019 - New Features
  @johnebaker Hi John, Recovering today from yesterday's walk - hot, rough terrain. It took a couple of hours to download a few days of videos shot with my GoPro. It seems that I have many clips of when it was not supposed to be recording, and missing
• Movie Studio

  2 answers, most recent on 9/12/2018

  Export video as MPEG-4 nothing happens (all other formats work).
  Any assistance is greatly appreciated. When I go to select Export video as MPEG-4 nothing happens (all other formats work). If I go across to Update MPEG-4 codec nothing happens. When I try an online update my program Movie Edit Pro 14 Plus Version
• Movie Studio

  3 answers, most recent on 8/12/2018

  RE: Brutal learning curve with Edit Pro Plus...
  @Kaywahjay Hi . . . . Is the pop-up project file that appears each time I open the program the best way to begin a new project for easily saving the progress that I've made? or is there a better, and simpler way to save my projects? . . . . That
• Video Pro X

  23 answers, most recent on 8/7/2018

  Archiving Mpeg 2 as 1920 x 1080 25p
  I recorded a video at Mpeg 2 1080p25 in Sony PXW-Z150. Bringing it onto the VPX timeline, there is no 1080p25 timeline template, so I use 1080i25.Everything plays fine, so I assume I'm not having interlacing problems or anything 'strange' going
• Video Pro X

  26 answers, most recent on 10/24/2018

  RE: [Feedback] How do you like version 16.0.1.268?
  @Recycler Hi Mike Definitely something funny going on. I cannot confirm your item 1. I can confirm item 2 however I do not quite get the same results ie: Manually move cursor cycling through videos 1 - 4 starting with 1 going round clockwisethis is
• Video Pro X

  25 answers, most recent on 6/17/2019

  RE: [Closed] Transition Plugins
    @Colorz Once again, you're showing stuff that is either done using the camera, manually, or someone made some of his own transitions templates using the tools available in the program, and saved them for reuse. In the case of your video link, the
• Movie Studio

  4 answers, most recent on 7/15/2018

  Trying to create 360 degree movie from video and pic from Insta360 ONE
  I can set up a new project so that the width and height are 3840x1940 with a aspect ratio of 2:1 in the "movie settings" of MEP. When I go to "export movie - video as mpg4" I can set the resolution to 3840x1920 but I can not set the ratio to 2:1. I
• Movie Studio

  25 answers, most recent on 6/26/2018

  RE: Using the 'Auto Lighting' feature ~ I've got a few basic questions...
  I am not a mod. I'm based in UK, and paid £30 for the basic, which is the max I'd spend (as was massively overpriced for this software). I get that you are a mod here so will ofcourse be bias purely for Magix, but the software is full of basic
• Movie Studio

  29 answers, most recent on 6/25/2018

  RE: [Closed] What 'quality level number' do I need to select to get max possible??
  When you are exporting the files from Magix to Mp4, go into 'File-export movie as mp4', select the export type, then use the 'advanced' tab to set the BR at whatever you want it to be. Roger No 'advanced tab' shows mate.Just a drop down menu of