• Video Pro X

  25 answers, most recent on 2/4/2021

  RE: Comparison Chart VPX vs MEP High-End Audio Mastering
  @CubeAce Hi Ray, I don't see what you say and I don't see that this has anything to do with High-End Mastering. For export, the sample rate is 48 kHz for both MEP and VPX - never 192 kHz; it's the Bitrate that goes to 192 kBit/s. The max for export
• Video Pro X

  25 answers, most recent on 2/4/2021

  Comparison Chart VPX vs MEP High-End Audio Mastering
  On the Comparison chart of VPX vs MEP, under Audio, is High-End Audio Mastering. VPX has it; MEP does not. Does anyone know what this means? I can't see any difference in the Mastering effects between VPX12 & MEP2021 Plus/Premium. I looked at
• SOUND FORGE

  6 answers, most recent on 2/1/2021

  RE: anti-aliasing
  it is under Izotope 64bit SRC. Hi John, indeed it is; I've just discovered that. But I'm still wondering: Does the native sample rate and bit depth converter on SF 3.0 set to maximum / mastering quality use an anti-aliasing filter automatically or
• SOUND FORGE

  6 answers, most recent on 2/1/2021

  RE: anti-aliasing
  Hi Jeff, Thanks for the reply, but I'm talking about anti-aliasing for digital audio, i.e. prior to reducing bit rate, the frequencies the new bit rate will be unable to reproduce are removed, so to avoid artefact (alias) created when the new
• SOUND FORGE

  6 answers, most recent on 2/1/2021

  RE: anti-aliasing
  @Scrivello Welcome to the Magix user to user forums. "Antialiasing" is a term most commonly applied to graphic objects (images and the like). For audio, and this is what I think you mean, we talk about Dithering. (If you want a rather technical
• SOUND FORGE

  6 answers, most recent on 2/1/2021

  anti-aliasing
  Hello, For a while I've been using Sound Forge Pro 3.0 to downsample 48kHz files to 44.1kHz for every day use. Recently, I've been finding out about the need for anti-aliasing when doing this. All the files I've done so far over the years in Sound
• SOUND FORGE

  One answer, on 1/26/2021

  RE: Cutting off 10 seconds at the end
  I recall this issue mentioned before but I do know of a fix. Make sure you are saving as the same sample rate or use the sample rate converter prior to save or save as.You could try resetting SF to the factory default settings ('File' menu in SF
• SOUND FORGE

  One answer, on 1/26/2021

  Cutting off 10 seconds at the end
  I'm using Sound Forge Audio Studio 12.6. I record my music on my home recording software (Sonor Home 7), edit it, mix it, eq it, etc. I use Sound Forge for the almost final mastering. One time I open Sound Forge, upload the music and everything
• SOUND FORGE

  6 answers, most recent on 1/23/2021

  RE: Email address
  Off topic but, for serial numbers, passwords and such. I have been using the free Password Safe for many moons. Each entry has a 'notes' box for other info, aside for the usual username and password fields.It is as secure as your master alphanumeric
• Music Maker

  2 answers, most recent on 1/21/2021

  RE: Recording guitar into music maker 2016
  @Mark-Anderton Is the Master Volume of your Marshall high enough?
• ACID

  6 answers, most recent on 1/20/2021

  RE: Send From Channel In Mixer?
  create as many 'Bus's' as you may need, assign tracks to Bus's, then assign the outputs of the Bus's to any outs on your audio interface. Click the 'Master' tab on the Bus, open the output box and assign away 😀
• Music Maker

  20 answers, most recent on 1/20/2021

  RE: [Solved] Soundpool: format cannot be read .mxcogg
  @wildeprods Hi . . . . The program says, you can't do that because the elements no longer exist because it's not Song Maker and DOES NOT function as Song Maker, but as Live Pads/Live Arranger", so you are stuck with a 2-minute Live pads demo song
• Music Maker

  20 answers, most recent on 1/20/2021

  RE: [Solved] Soundpool: format cannot be read .mxcogg
  @johnbaker You wrote: "IIRC they are locked to the program they were purchased for". Well, how incredibly stupid is that? I can understand Magix's protectionism so their mxc loops can't be used on another company's products. But to be SO
• Other products

  One answer, on 1/18/2021

  [Closed] Master bus
  I switched from Vegas 11 to 18. After quite a bit of searching I cannot find the "master bus" as it was called in Vegas 11 where I could use a slider to raise or lower the entire project volume. Where is the equivalent function in 18. Thanks.
• ACID

  3 answers, most recent on 2/25/2022

  a couple of tips for better stability?
  So, I, like probably the rest of us, have spent years struggling with Acid stability. My projects are relatively simple - DJ mixes with just a few audio tracks, a couple of VSTs on each track, and some more on the master but. But for whatever reason
• Movie Studio

  8 answers, most recent on 1/15/2021

  RE: help
  @kev Once again, these are transitions, not collages - and they are under Transitions. There are 10 different transitions that have the same background during the transition - the Photo Table theme. You can pick one transition and apply it multiple
• SOUND FORGE

  7 answers, most recent on 3/9/2021

  Sound Forge Audio Studio 14 - Did I buy the wrong thing?
  For years I used SoundForge Pro 4 and 6 to do a few basic things. Those no longer work, are 16 bit, etc, so I had to upgrade to a newer version, Audio Studio 14. All I want to is: Trim the beginning and/or end of a WAV file Fade the end of a WAV
• SOUND FORGE

  13 answers, most recent on 5/4/2022

  RE: Silence when applying plug in chain
  Hi All - sadly never really found a solution to be consistent. (I've tried John B suggestion too.) I just changed my workflow depending on what I'm doing. For straight mastering, I use Sound Forge with any of my various plugins (IK Multimedia,
• SOUND FORGE

  6 answers, most recent on 1/12/2021

  RE: Sound Forge 14 audio recording failure
  I am not sure, but in 'View> Record options', try setting 'Monitor' to 'ON' or 'AUTO. This can create a feedback loop though in some systems, but you will hear immediately if it does. Below are the record instructions for SF Pro-11 and later. Pro
• Music Maker

  5 answers, most recent on 1/7/2021

  RE: unable to launch Music Editor add on
  Thanks for reply...i managed to download all four missing dll files....I did make some progress....now when I follow the steps in Music Maker to launch the music editor I get the splash screen for Music Maker Editor V3 followed by another error
• Music Maker

  5 answers, most recent on 1/7/2021

  unable to launch Music Editor add on
  Hey all Happy 2021! I have the Music Maker Free 2021 (I'm assuming it is 2021 ..version number 29.0.4.25 64bit) I purchased the Music Editor add-on for Mastering and Burn tool ...however when I select an object as other posts suggest to open the
• Movie Studio

  9 answers, most recent on 1/4/2021

  RE: MEP2016 Projects files paths
  @CubeAce Hi Ray . . . . Is it really worth it unless you have lost your master export copy? . . . Good point - I have not got started on it yet, there is no rush as although they are in flv format I am not using Flash player in the web pages to play
• Movie Studio

  9 answers, most recent on 1/4/2021

  RE: MEP2016 Projects files paths
  @johnebaker Hi John. however may have some minor issues loading them due to the MEP versions they were created on (17 and MX) - fortunately there are no special transition effects, animations, etc in them. Again, that is another yet another 'Kettle
• Movie Studio

  9 answers, most recent on 1/4/2021

  RE: MEP2016 Projects files paths
  @terrypin Hi Terry . . . .Like you and John I use the same tool to backup the project and its required files . . . . I don't, and never have, used the backup option in MEP/VPX - I have an entirely different method, my projects are structured in a