• Video Pro X

  12 answers, most recent on 7/4/2019

  RE: No work!
  Hi I filming in 1920 1080 p ( 28MB/s) and in Bluray slider default is 18mb!!! I presume you are recording in 1080 50Progressive? The "default" export template in VPX is set for 1080 25interlaced which is the Bluray standard, and as such does not
• Movie Studio

  10 answers, most recent on 12/28/2018

  RE: Incomplete removal of borders when using Magix stabilization module
  Thanks for the video clips - I installed the Lagarith codec and tested the stabilisation with Mercalli v2 - I had to use MEP 2019 as my 2016 installation only has Mercalli v4 - and this is the before and after result of a default settings analysis,
• Video Pro X

  54 answers, most recent on 5/8/2019

  RE: [Feedback] How do you like version 16.0.2.306 ?
  @MAGIX_Redaktion Hello Mathias, The list of problems, with one exception, item 16 - 3D titles, still stands: https://www.magix.info/us/forum/feedback-how-do-you-like-version-16-0-2-304--1218088/?page=2#ca1428755 I am dismayed about points 1 and 2,
• Video Pro X

  54 answers, most recent on 5/8/2019

  RE: [Feedback] How do you like version 16.0.2.306 ?
  Well thank you once again Magix.You have just managed to put me back 2 years.I took the chance on 306 because I was having crashing and freezing with 304 and now I am back to jerky unstable playback.I really don't know what the answer is here.You
• Movie Studio

  4 answers, most recent on 12/21/2018

  RE: Can you play an Uncompressed AVI file on TV?
  Hi . . . But then won’t the video be compressed in an MP4 or AVCHD file? . . . Yes considerably compared to an uncompressed AVI file, however as I said above - the difference in image quality compared to uncompressed AVI, is negligible subject to
• ACID

  9 answers, most recent on 2/1/2019

  RE: List of compatible Midi Controllers?
  @sheppo Yes, thank you sheppo. I actually looked there first when researching problems I had initially. Controller is integral to MIDI functionality which is half of Acid, at least for me. Will
• Video Pro X

  19 answers, most recent on 12/12/2018

  RE: Rendering artifats
  Hi Duncan, Out of interest, why are you wanting to go to the BlackMagic camera presumably to replace your Panasonic HC-X 200. Unless you are doing very high level work, you could be letting yourself in for a lot of hard work, not to mention a lot
• Video Pro X

  19 answers, most recent on 12/12/2018

  RE: Rendering artifats
  @v850tw Hi . . . . I see that they are showing RAM, and another type of memory [forget the name] and they add it up as total RAM. . . . . That will probably be Virtual memory which is really some of the hard drive space . . . . . I wonder if that is
• Video Pro X

  23 answers, most recent on 3/5/2019

  RE: Speed - 8mm film scanned at 20fps - need 16fps
  Hi Jeff, Here is the link to the one that I purchased, the Pro model, 1080P, though not through Amazon. Look at the comments by Steve H. I wouldn't purchase the older version 720P, but so far, I find the 1080P to be very good. There is a slight
• Movie Studio

  41 answers, most recent on 12/7/2018

  RE: How do I make LOGO STINGERS
  When I am using the COLLAGE function, on 4 videos, all roughly same lengths, how come it plays only half the video and resets? Also, how do I change the background color in collage frame from black to brown in the background? is there a way to make
• Samplitude

  3 answers, most recent on 12/3/2018

  RE: HELP For real! Independence content online install stuck again
  How did you end up? Hope you got it all downloaded. Took me a day and a half to get it all, lol. Let us know, and mark the post resolved if it is ..... Will
• Video Pro X

  2 answers, most recent on 12/1/2018

  RE: Uploading PAL SD 4:3 to YouTube AND Mastering an old DVD Master
  Hi Seamus. I assume you've seen YT's own recommendations on this page? I've never uploaded any 4:3 footage to YT so can't comment on the specifics you ask about; my personal inclination would NOT be to crop/resize in VPX, nor to change the ratio on
• Video Pro X

  2 answers, most recent on 12/1/2018

  Uploading PAL SD 4:3 to YouTube AND Mastering an old DVD Master
  Two in one question here, but very related... I have an old movie I shot many moons ago. It’s PAL 4:3, Interlaced at Bottom Field First. I only have the PAL DVD master. I've cleaned up some audio and video 'discrepancies' that modern technology
• Music Maker

  4 answers, most recent on 11/29/2018

  RE: Pitches of Soundloops?
  Hi, welcome to the Magix forums. Say I want a C flat, what do I do? That's quite easy, since Western Music uses Equal Temperament tuning: Cb = B. Finally, what do you do if a loop is longer than you need? For example, i have a bar of A minor
• Music Maker

  4 answers, most recent on 11/29/2018

  Pitches of Soundloops?
  Hi all, Downloaded MM19 and have two problems with soundloop pitches. I think someone posted earlier to say that pitch 1-2-3.. etc are keys of C, D, E etc. If all soundloops are made in the same key, why confuse the bejeezus out of everyone and
• Movie Studio

  19 answers, most recent on 11/28/2018

  RE: Rotate a filmclip, unable to export it for viewing
  Hi all, and thanks for your replies I did try some more yesterday, however without any success.I do not think the audio is a matter, as the sound is OK in the resulting videoclip (It is a film in a sense, however only just over a second long
• Movie Studio

  15 answers, most recent on 11/25/2018

  RE: Bitrate vs Quality sliders for encoding video
  @johnebaker Hi John. I am fairly new to digital video, less than two years but I've been taking digital stills with higher end cameras since about 2009 and doing voluntary work for charitable trusts and local councils for about five years. Video
• ACID

  9 answers, most recent on 11/26/2018

  RE: AP8 (807) Not saving DN-e1 Synth settings in Project
  I'm not losing presets or even losing the correct synth. Just the screen redraw is lagging. Pretty simple to close and re-open it. Takes half a second. I can't imagine that what you are experiencing is just that ..... Seems a worse
• Movie Studio

  15 answers, most recent on 11/25/2018

  RE: Bitrate vs Quality sliders for encoding video
  @jak.willis, @johnebaker Hi John, what you have described is the job for the quality slider, ie, the movement side of things in the compression used within the encoding algorithm. The bit rate compression happens from the sensor readings and
• Movie Studio

  15 answers, most recent on 11/25/2018

  RE: Bitrate vs Quality sliders for encoding video
  Hi Jak. Pretty much, but because we don't see individual frames with our eyes, some blur in the individual frames around a moving subject within a video can actually give a more natural looking effect that trying to make it look sharper or have
• Movie Studio

  15 answers, most recent on 11/25/2018

  RE: Bitrate vs Quality sliders for encoding video
  Hi Jak. Pretty much, but because we don't see individual frames with our eyes, some blur in the individual frames around a moving subject within a video can actually give a more natural looking effect that trying to make it look sharper or have less
• Movie Studio

  11 answers, most recent on 11/20/2018

  RE: Burned discs will not play on either of two DVD players
  The project is in two parts. Both used only about half (+/-) of the dual layer discs (which I had on hand), so a minor rearrangement for uses about 80% capacity of each. As far as trying to read the DL discs, my players seemed to be hopping all over
• Photostory

  5 answers, most recent on 11/16/2018

  RE: Photostory Deluxe export MPEG 4 not working
  @Vera-Fitzgerald It actually exports now but it doesn't save it as a mp4 file even though I'm use Export to MPEG-4. It saves it as m2ts which is a huge file That I cannot explain! I've just tested this with a very short sequence on my computer and
• ACID

  7 answers, most recent on 1/13/2019

  RE: Unavailable fx in Acid Pro 8
  Perhaps if you rename the higher level folder, so that you can launch AP8. Then, add back half of the plugins. If it doesn't crash, you know it's in the other half. Add back half of whatever remains, and half again, until you isolate the troublesome